Sérgio Kojima wrote:
Hi Josh,
The printers/802.1x are OK!
But the problem is the printers that not support 802.1x, like Kyocera KM-2050.
Anyway?
2007/9/5, Josh Howlett <[EMAIL PROTECTED]>:
Do your printers support 802.1x?
josh.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Sérgio Kojima
Sent: 05 September 2007 18:58
To: [email protected]
Subject: Network Printers with freeradius? Anyway?
Hello all.
Finaly my FreeRADIUS 2.0.0-pre2 is running with Samba PDC +
OpenLdap and foundry/dot1x switchs. Very well...
Now, the next level is the printers. How to configure my
network printers with freeradius?
No solicitation does not arrive when i run "radiusd -X".
Printers are using DHCP.
See you!
=============================================================
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Well what do you actually want to do with them ?
If it's just configuration of VLANS etc.. the obvious solution is to use
mac based authentication on the switch the printers are connected to...
Not that secure ... but they are printers... shouldn't be on a sensitive
network anyway.
Unless your talking about the printers doing auth/autz via RADIUS for
users spooling print jobs to them...
Arran
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
