most probably, radius.conf and the users file are no longer compatible. You must rebuild them manually.
There error is probably in the users file: auth: type "" ERROR: Unknown value specified for Auth-Type. Cannot perform requested Also look at eap.conf, tls section. On 9/14/07, mallika <[EMAIL PROTECTED]> wrote: > > As you said i compiled my code in 1.1.0 because for intermediate CA > authentication 1.0.x series won't work but in 1.1.0 after compilation user > not getting authenticated.iam sending logs . authentication type is not > getting.please can help what are the things should i change in 1.1.0. > > > > radius_xlat: '(cn=default)' > radius_xlat: 'ou=users,dc=example,dc=com' > rlm_ldap: ldap_get_conn: Checking Id: 0 > rlm_ldap: ldap_get_conn: Got Id: 0 > rlm_ldap: performing search in ou=users,dc=example,dc=com, with filter > (cn=default) > rlm_ldap: performing search in cn=default, ou=profiles,dc=example,dc=com, > with filter (objectclass=radiusprofile) > rlm_ldap: Adding radiusTunnelPrivateGroupId as Tunnel-Private-Group-Id, > value 1 & op=11 > rlm_ldap: Adding radiusTunnelMediumType as Tunnel-Medium-Type, value 6 & > op=11 > rlm_ldap: Adding radiusTunnelType as Tunnel-Type, value 13 & op=11 > rlm_ldap: Adding radiusSessionTimeout as Session-Timeout, value 1800 & op=11 > rlm_ldap: Adding radiusClass as Class, value default & op=11 > rlm_ldap: Added password default in check items > rlm_ldap: looking for check items in directory... > rlm_ldap: Adding ntPassword as NT-Password, value > 7D891AB402CAF2E89CCDD33ED54333AC & op=21 > rlm_ldap: Adding lmPassword as LM-Password, value > 29D5C31BFF3D8D25AAD3B435B51404EE & op=21 > rlm_ldap: looking for reply items in directory... > rlm_ldap: user default authorized to use remote access > rlm_ldap: ldap_release_conn: Release Id: 0 > *** AGENT Modifications***** > modcall[authorize]: module "localhost" returns ok for request 1 > modcall: leaving group authorize (returns ok) for request 1 > rad_check_password: Found Auth-Type EAP > auth: type "" > ERROR: Unknown value specified for Auth-Type. Cannot perform requested > action. > rad_check_password() Returns: -1 > auth: Failed to validate the user. > xmlMessage: User default Failed Authentication > Login incorrect: [default/<no User-Password attribute>] (from client rad > port 0 cli 00-0F-76-00-87-D6) > Delaying request 1 for 1 seconds > Finished request 1 > Going to the next request > > -- > View this message in context: > http://www.nabble.com/not-getting-authentication-in-1.1.0-tf4442509.html#a12675286 > Sent from the FreeRadius - User mailing list archive at Nabble.com. > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > -- "In a sea of glass shards, I hear you screaming" --icchan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
