Well, AP is not responding. Request is for wireless access and attributes in the reply are for shell access. It might not like that.
Ivan Kalik Kalik Informatika ISP Dana 16/9/2007, "Andrew Rowson" <[EMAIL PROTECTED]> piše: > > >[EMAIL PROTECTED] wrote: >> Comment it out anyway. You are setting Auth-Type Local in SQL database >> then. If not in radcheck then in radgroupcheck. >> >> Ivan Kalik >> Kalik Informatika ISP > >I feel really stupid now. It was sitting there in radgroupcheck setting >the auth-type to local. > >ARGH. > >Ok, regroup. The new output is in the same place as before >(http://public.growse.com/radiusd.log) - it sets the auth-type to EAP >and seems to issue the attributes (my cisco priv ones are there) ok. My >laptop still doesn't get an IP address, but this may now be an issue >with the AP. > >Can I safely now say that freeradius is behaving correctly and the issue >is now with the AP, or does the above output still point to a freeradius >issue? > >Thanks for everyone's help so far. > >Andrew > >> >> Dana 16/9/2007, "Andrew Rowson" <[EMAIL PROTECTED]> piše: >> >>>>> Ok, I've upgraded to 1.1.7, and I get the auth-type local issue again. >>>>> The log is up at the same place as before, >>>>> http://public.growse.com/radiusd.log >>>>> >>>>> I'm at a bit of a loss. I can't be the only person who wants to put user >>>>> credentials for a PEAP setup into a mysql db? >>>>> >>>> modcall[authorize]: module "sql" returns ok for request 0 >>>> users: Matched entry DEFAULT at line 155 >>>> modcall[authorize]: module "files" returns ok for request 0 >>>> modcall: leaving group authorize (returns updated) for request 0 >>>> rad_check_password: Found Auth-Type Local >>>> auth: type Local >>>> auth: No User-Password or CHAP-Password attribute in the request] >>>> >>>> Remove whatever is on line 155 of the "users" file; it is setting >>>> Auth-Type (almost always a bad idea) to "Local" so FreeRadius thinks it >>>> should check the password; which it shouldn't, since this is an EAP >>>> conversation. >>> I had the following on line 155, which when commented out, seems to make >>> no difference. >>> >>> DEFAULT Auth-Type = System >>> Fall-Through = 1 >>> >>> >>> Andrew >>> - >>> List info/subscribe/unsubscribe? See >>> http://www.freeradius.org/list/usershtml >>> >>> >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
