On Wed, 2007-09-19 at 16:40 +0800, ST Wong (ITSC) wrote: > Thanks for all advice. Result of testing using eapol_test is okay, > except error "OpenSSL: tls_connection_handshake - Failed to read > possible Application Data error:00000000:lib(0):func(0):reason(0)" is > found: > > ------------------------------- cut here ----------------------- > [snipped] > SSL: SSL_connect:SSLv3 read finished A > SSL: (where=0x20 ret=0x1) > SSL: (where=0x1002 ret=0x1) > SSL: 0 bytes pending from ssl_out > OpenSSL: tls_connection_handshake - Failed to read possible Application > Data error:00000000:lib(0):func(0):reason(0) > SSL: No data to be sent out > EAP-TTLS: TLS done, proceed to Phase 2 > [snipped] > ------------------------------- cut here ----------------------- > > However, the rest of debug message seems to be normal. I've no idea > about the cause of this message. Would anyone pls help?
The cause is OpenSSL is rubbish. Ignore it. > > Besides, I only see radius messages if tcpdump is used during testing. > Seems TLS packets are encapsulated in EAP message, which is encapsulated > in radius packets. Is it correct? Yes - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
