Hi.... Thanx for the reply.
Firstly, I have just upgraded freeradius to the latest version, but it didn't make any difference. I have also looked thru the documentation, and also searched the web to see if I could find how this might be done. I found a thread on a similar subject at: http://www.nabble.com/EAP-TTLS-outer-identity---accounting-t3391290.html ....this looks similar to the issue I am seeing.....one of your replies to this thread seems particularly relevant: http://www.nabble.com/Re%3A-EAP-TTLS-outer-identity---accounting-p9573830.html However, I have tried the suggestions in this reply: * Enable use_tunneled_reply & copy_request_to_tunnel (I already had these enabled). * Have the following in the users file: DEFAULT FreeRADIUS-Proxied-To == 127.0.0.1 User-Name := `%{User-Name}` ....but it still makes no difference.....radwho still returns 'anonymous' whenever I log in. Not sure where I can go from here..... Thanx in advance for any help. Chris. On 03/10/2007, Alan DeKok <[EMAIL PROTECTED]> wrote: > Chris Bradshaw wrote: > > Thanx for the reply. I do have 'use_tunneled_reply = yes' in eap.conf, > > but I am still seeing the outer identity showing up when I use radwho. > > As I said, you also have to send the inner tunnel name back in the > Access-Accept. > ... > > Sending Access-Accept of id 7 to 10.11.2.91:1645 > ... > > User-Name = "anonymous" > > See? You're telling the NAS to use "anonymous" for the accounting > logs. Set the User-Name in the reply for the inner tunnel session, and > it will be used in the outer session, too. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
