I am running freeradius-1.1.3. I am using freeradius to authenticate
users logging into Cisco switches and routers. I am trying to use
radrelay to send the radius accounting data to our syslog server. When
I run radrelay in debug mode, it gives this error:
Record Rate since startup: 42.57
Packet Rate since startup: 0.00
read_one: No Acct-Status-Type attribute present. Rejecting record.
read_one: No Acct-Status-Type attribute present. Rejecting record.
radrelay: Running and Processing Records.
Seconds since startup: 7
Records Read: 299
Packets Sent: 0
When I check the contents of the /var/log/radius/radacct/detail-combined
file, it contains the following attributes:
Packet-Type = Access-Request
Wed Oct 3 15:36:02 2007
NAS-IP-Address = 10.3.51.1
NAS-Port = 1
NAS-Port-Type = Virtual
User-Name = "testuser"
Calling-Station-Id = "10.3.0.51"
Client-IP-Address = 10.3.51.1
Is it possible to have the Acct-Status-Type attribute included in the
Access Request that is logged to the
/var/log/radius/radacct/detail-combined file? If so - how would I go
about achieving this?
I have checked the /etc/raddb/dictionary and related files (in
/usr/share/freeradius/) and see the Acct-Status-Type attribute listed,
but am not sure why it is not being included in the above accounting
access-request.
Thanks in advance,
Walter Gould
Auburn University
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
