1.1.3 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, October 12, 2007 12:50 PM To: FreeRadius users mailing list Subject: RE: peap/eap tls authentication
You are using an old version of the server. Which one? Why don't you use the latest? >dkupis Auth-Type := system > Service-Type = NAS-Prompt-User, > cisco-avpair == "shell:priv-lvl=15", > idle-timeout = 1800 1. How sure are you that you can get to the command prompt over a wireless interface? I don't think that will work. 2. Try something like: dkupis User-Password == "whatever"[, Auth-Type := EAP] try without Auth-Type first. If it doesn't start EAP convesation add it. Ivan Kalik Kalik Informatika ISP With this you should try to put User-Password instead of Auth-Type on the first line. Dana 12/10/2007, "Dorota Kupis" <[EMAIL PROTECTED]> piše: >I do post users >thanks > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL >PROTECTED] >Sent: Friday, October 12, 2007 12:03 PM >To: FreeRadius users mailing list >Subject: Re: peap/eap tls authentication > >You are setting up Auth-Type System. Post the entry in users file: > >> users: Matched entry dkupis at line 1 > >Ivan Kalik >Kalik Informatika ISP > > >Dana 12/10/2007, "Dorota Kupis" <[EMAIL PROTECTED]> piše: > >>Hello, >> >> >> >>I'm not familiar with freeradius yet. I read some HOWTOs and I do try to >>make wireless Windows XP talk to Radius server. I have an AP 1131. I >>have managed to make this configuration work with cisco ACS in the past, >>so AP part should be OK. >> >> >> >>I do send the output from radiusd -X >> >>Hope somebody can help me to point out which parts of configuration >>should I look into and what possible problems could be. >> >> >> >>Thanks for your understanding. >> >> >> >>Dorota >> >> >> > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
