On Thursday 25 October 2007 17:26:10 John Morris wrote: > I then added a second switch to the freeradius client configuration (nas > table), and encountered a problem. The password was being rejected. So I > ran Freeradius -X so I could see what was going on. > > On the failed password attempt (second and now third switch in the list) I > see something like this: > > rad_recv: Access-Request packet from host 192.168.x.z:1645, id=1, length=80 > NAS-IP-Address = 192.168.x.z > NAS-Port = 1 > NAS-Port-Type = Virtual > User-Name = "username" > Calling-Station-Id = "192.168.x.y" > User-Password = "r\306\324\333M\014\247\022\363\216K\257`\315#]"
Debug output like this usually points to non-matching RADIUS secrets. Check the radius secret in your switch config as well as the secret configured in your nas SQL table. Freeradius only reads the nas table on startup, so if you make changes to that table, you must restart the daemon for those changes to take effect. Kevin Bonner
signature.asc
Description: This is a digitally signed message part.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
