Hi I am trying install the PAM_RADIUS_AUTH on a Solaris 10 server to use RADIUS for user authentication. I have managed to successfully compile and install the pam plugin. When I tried to telnet to the machine from a different server I am getting the following error.
Failed looking up IP address for RADIUS server radius1 (errcode=12) I have made a host entry for this server name in /etc/hosts file and able to ping the RADIUS server with name. But still its not working. Could you please help on resolving this. Regards Soban **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS*** - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
