You have done a grand job of destroyng server configuration. Best thing you can do is to go back to default configuration. Put a username with Cleartext-Password at the top of the users file. Use radcheck to check that it works. Then set up ldap and remove the users file entry. Check with radcheck again to see if ldap works. Then set up whatever eap method you are using.
Ivan Kalik Kalik informatika ISP Dana 6/11/2007, "Ryan Pugatch" <[EMAIL PROTECTED]> piše: >Hello, > >While I resolved my previous issue with radiusd segfaulting, I'm now >running in to a new issue. > > >I'm attempting to have my Linksys WRT54GL (running DD-WRT v23 SP2) use >WPA RADIUS against a FreeRADIUS server (FreeRADIUS Version 1.1.7, for >host i686-pc-linux-gnu) and subsequently have the FreeRADIUS server use >our existing LDAP directory (OpenLDAP v2.2.13-4). > >When a user tries to connect to the access point and the access point >contacts the radius server, the following happens: > > >Ready to process requests. >rad_recv: Access-Request packet from host 192.168.42.23:2050, id=0, >length=129 > User-Name = "rpugatch" > NAS-IP-Address = 192.168.42.23 > Called-Station-Id = "0018f8c16a5a" > Calling-Station-Id = "0017f2e7032a" > NAS-Identifier = "0018f8c16a5a" > NAS-Port = 14 > Framed-MTU = 1400 > NAS-Port-Type = Wireless-802.11 > EAP-Message = 0x0200000d017270756761746368 > Message-Authenticator = 0xe1b0b05b118ebe49d6b79b7569de75b1 > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 0 >rlm_ldap: - authorize >rlm_ldap: Attribute "User-Name" is required for authentication. > modcall[authorize]: module "ldap" returns invalid for request 0 >modcall: leaving group authorize (returns invalid) for request 0 >Delaying request 0 for 1 seconds >Finished request 0 >Going to the next request >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- > > > >This is most likely an issue with my configuration, however, I'm not >sure what the issue is. I'd appreciate any help I can get. > > >Thanks, > >Ryan >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
