On 2007-11-11 18:27, Philippe Breton wrote:
On Sun, 2007-11-11 at 17:37 +0100, Krzysztof Olędzki wrote:
On 2007-11-10 17:30, Philippe Breton wrote:
Did you setup your switch properly:
domain (...)
vlan-assignment-mode string
Hard to give a 100% answer on this question. I believe I did with the
help of 3com support.
This is the most important part. Please make sure it is set up (display
current-configuration).
... I agree with you. The 4500G is new to me. I believe I got it right.
One important fact to keep in mind is the semantic is a litle different
between the 5500g and 4500G, i.e. what's in this doc does not apply in
the 4500G
http://www.3com.hu/download/switch_radius_setup.doc/switch_radius_setup.doc
This is my current config:
Please excuse me for the long delay. A day should be longer than 24h. ;)
description VLAN181
#
radius scheme system
server-type extended
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domain
radius scheme radius1
server-type standard
primary authentication 192.168.181.18
key authentication sdfsdfsfsf
user-name-format without-domain
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
domain wustl.edu
authentication default radius-scheme radius1
access-limit disable
state active
idle-cut disable
self-service-url disable
Please add here:
vlan-assignment-mode string
accounting optional
It is required for 3c5500G, so it should also solve the problem on
3c4500G. If not, please enable radius/mac-authentication/port-security
debugging on the switch.
Best regards,
Krzysztof Olędzki
--
Krzysztof Olędzki
Axel Springer Polska Sp. z o.o.
tel: +48-22-2320969
fax: +48-22-2325530
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
