G'day Ivan, Thanks for your reply. I have seen an Access Point using the same WRT54G as mine which apparently authenticates from a freeradius installation on a debian etch box and it only requires a username and password to login.
How is that done? Thanking you in anticipation, build On 21/11/2007, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > What authentication protocol are you using? If you are using 802.1x you > have to use certificates. > > Ivan Kalik > Kalik Informatika ISP > > > Dana 20/11/2007, "build" <[EMAIL PROTECTED]> piše: > > >G'day All, > >This is my first post so I'd like to thank those who make this list possible. > > > >I see this has been asked before but I could not find a complete > >answer in the archive or google. I want to setup a freeRADIUS server > >on a debian etch system to authenticate for a WRT54G AP using > >username/passwords only (no certificates). I've tried to use a few > >howtos and just ignore the certificates bit but no success yet. > > > >Does anyone know of a HowTo that I can use to get started? > > > >Thanking you in anticipation, > >build > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
