Alan DeKok wrote:
Andrew D Kirch wrote:
When I connect a client to freeradius the client authenticates, gets an
accept/accept, but does not get an IP address. I've tried it with the
Group and Pool-Name directives in each client's block, and I've tried it
with them in a DEFAULT by themselves. Neither has handed out an IP
address.
...
radius:/etc/freeradius# freeradius -v
freeradius: FreeRADIUS Version 1.1.3, for host i486-pc-linux-gnu, built
on Dec 16 2006 at 23:48:11
You should upgrade to at least 1.1.6, maybe 2.0.1
And with all of the information you posted, you didn't include the
most important, which is requested in the FAQ, README, INSTALL, "man"
page, and daily on this list: radiusd -X.
Is there some other place in the documentation where this should be
suggested?
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
You might try putting it at the top of radiusd.conf, everyone's
eventually going to see that. Because I use Debian the others are
packaged and abstracted away. I used the Freeradius wiki quite a bit as
well, and perhaps it could be more visible there too. In fact I think
this might be an honorable use of the <blink> element as I was able to
use the freeradius -X output to immediately debug my problem. Thank you
for the help.
Andrew
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
