that's why i sent my second email telling you to make sure $_incdir is
defined in your .rpmmacros file. =)
Joe Vieira
UNIX Systems Administrator
Clark University - ITS
Andrew Long wrote:
Well, not so lucky after all. Looks like the build get 99% completed
and we get an error:
+ RADDB=/var/tmp/freeradius-root/etc/raddb
+ perl -i -pe 's/^#user =.*$/user = radiusd/'
/var/tmp/freeradius-root/etc/raddb/radiusd.conf
+ perl -i -pe 's/^#group =.*$/group = radiusd/'
/var/tmp/freeradius-root/etc/raddb/radiusd.conf
+ perl -i -pe 's/# shadow =/shadow =/'
/var/tmp/freeradius-root/etc/raddb/radiusd.conf
+ rm -f /var/tmp/freeradius-root/usr/share/man/man8/builddbm.8
+ rm -f /var/tmp/freeradius-root/usr/sbin/rc.radiusd
+ install -m 0644 CREDITS
/var/tmp/freeradius-root/usr/share/doc/freeradius-2.0.1
+ install -m 0644 COPYRIGHT
/var/tmp/freeradius-root/usr/share/doc/freeradius-2.0.1
+ install -m 0644 LICENSE
/var/tmp/freeradius-root/usr/share/doc/freeradius-2.0.1
+ cd redhat
+ install -m 755 rc.radiusd-redhat
/var/tmp/freeradius-root/etc/rc.d/init.d/radiusd
+ install -m 644 radiusd-logrotate
/var/tmp/freeradius-root/etc/logrotate.d/radiusd
+ install -m 644 radiusd-pam /var/tmp/freeradius-root/etc/pam.d/radius
+ cd ..
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip
+ /usr/lib/rpm/brp-strip-static-archive
strip: Unable to recognise the format of the input file
`/var/tmp/freeradius-root/usr/lib/rlm_perl.a(DynaLoader.a)'
strip: Unable to recognise the format of the input file
`/var/tmp/freeradius-root/usr/lib/rlm_perl.a(DynaLoader.a)'
+ /usr/lib/rpm/brp-strip-comment-note
Processing files: freeradius-2.0.1-0
error: File must begin with "/": %{_incdir}/freeradius/*
RPM build errors:
File must begin with "/": %{_incdir}/freeradius/*
Any hints?
- Andrew
On Jan 28, 2008 8:55 AM, Joe Vieira <[EMAIL PROTECTED]> wrote:
you'll need to either rename everything in the spec file to be
"freeradius-server"
or just open the tar.gz rename the directory INSIDE IT (which is also
freeradius-server) to freeradius-2.0.1... then zip it all back up and
run your spec again and it will work.
Joe Vieira
UNIX Systems Administrator
Clark University - ITS
Andrew Long wrote:
Hello:
I am trying to build the rpm for 2.0.1 on CentOS 5. The first oddity
is that the source now comes as freeradius-server-2.0.1.tar.gz;
starting the rpmbuild with $ rpmbuild -bb freeradius.spec yields an
error that SOURCES/freeradius-2.0.1.tar.gz does not exist. I tried
renaming freeradius-server-2.0.1.tar.gz to freeradius-2.0.1.tar.gz,
and now the build starts, but it always ends with the following error:
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd freeradius-2.0.1
/var/tmp/rpm-tmp.71302: line 29: cd: freeradius-2.0.1: No such file or directory
error: Bad exit status from /var/tmp/rpm-tmp.71302 (%prep)
Here is the block from the rpm-tmp file:
set -x
umask 022
cd /home/along/rpmbuild/BUILD
cd /home/along/rpmbuild/BUILD
rm -rf freeradius-2.0.1
/bin/gzip -dc /home/along/rpmbuild/SOURCES/freeradius-2.0.1.tar.gz | tar -xvvf -
STATUS=$?
if [ $STATUS -ne 0 ]; then
exit $STATUS
fi
cd freeradius-2.0.1 <----------------------------------------------LINE 29
[ `/usr/bin/id -u` = '0' ] && /bin/chown -Rhf root .
[ `/usr/bin/id -u` = '0' ] && /bin/chgrp -Rhf root .
/bin/chmod -Rf a+rX,u+w,g-w,o-w .
I am not an expert with rpmbuild, so I apologize if this is a bit
off-topic. I preceded the build with
$ rpmbuild --clean freeradius.spec as I had previously build 1.1.7 on
the same host.
- Andrew
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
