Alan DeKok wrote:
Arran Cudbard-Bell wrote:
Might be any idea to replace
accounting {
...
# Filter attributes from the accounting response.
if(!"%{control:Proxy-To-Realm}"){
attr_filter.accounting_response
I'll look into it...
Still getting internal attributes displayed...
Fixed.
Yep confirmed.
Sending Accounting-Request of id 108 to 194.82.174.185 port 1813
Acct-Session-Id = "004E0000002C"
Acct-Status-Type = Start
Acct-Authentic = RADIUS
Acct-Delay-Time = 0
NAS-Port = 1
Calling-Station-Id = "001B63A3A8DD"
Service-Type = Framed-User
NAS-IP-Address = 139.184.8.16
NAS-Identifier = "hp-e-its-dev8021x-sw1"
User-Name = "[EMAIL PROTECTED]"
Proxy-State = 0x313931
Proxying request 9 to home server 194.82.174.185 port 1813
Sending Accounting-Request of id 108 to 194.82.174.185 port 1813
Acct-Session-Id = "004E0000002C"
Acct-Status-Type = Start
Acct-Authentic = RADIUS
Acct-Delay-Time = 0
NAS-Port = 1
Calling-Station-Id = "001B63A3A8DD"
Service-Type = Framed-User
NAS-IP-Address = 139.184.8.16
NAS-Identifier = "hp-e-its-dev8021x-sw1"
User-Name = "[EMAIL PROTECTED]"
Proxy-State = 0x313931
Going to the next request
Thanks :)
Small cosmetic one
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/filters/attrs.access_reject"
key = "%{User-Name}"
}
[/etc/raddb/filters/attrs.access_reject]:11 WARNING! Check item
"Event-Type" found in filter list for realm "DEFAULT".
}
}
Thats not a 'Check-Item' thats a user defined internal attribute.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Arran Cudbard-Bell ([EMAIL PROTECTED])
Authentication, Authorisation and Accounting Officer
Infrastructure Services | ENG1 E1-1-08
University Of Sussex, Brighton
EXT:01273 873900 | INT: 3900
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html