Ok I'll look at it thanks but
what about Disconnect message ?
I pull this info from my log
User-Name = [EMAIL PROTECTED] Acct-Status-Type = Start
Acct-Session-Id = "12345678.90.123" NAS-Identifier = "router"
NAS-IP-Address = 200.10.50.100 NAS-Port-Type = Virtual
Framed-IP-Address = 200.10.50.1 Acct-Delay-Time = 0
Client-IP-Address = 200.10.50.100 Acct-Unique-Session-Id =
"8d120506b2972302"
I put this in packet.txt
I tried :
cat packet.txt | radclient -x 200.10.50.100:3799 disconnect mysecret
But radclient keep retrying and it doesn't seams to work !
on the web site it mentioned I need disconnect enabled Nas ?
Someone already tried this ?
Thanks
> Date: Wed, 27 Feb 2008 21:31:06 +0000> To:
> [email protected]> Subject: Re: Force user disconnect on
> NAS> From: [EMAIL PROTECTED]> > J-P Raymond wrote:> >> > Question,> > > > Is
> it possible from the radius server to force a user to disconnect ?> > > > If
> yes what do I need to do that ?> > > > Normal> > Client --> NAS --> Radius
> server> > > > I would like to send a request> > Radius server --> NAS X
> Client> > > > Thanks for your time> > > > > >> >> >
> ------------------------------------------------------------------------> >>
> > -> > List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html> Yes but your NAS needs to support
> CoA (Change of Authorisation) , and > your RADIUS server needs to support it
> too; currently FR doesn't.> > Your best bet is to use the standard 802.1x mib
> and force > re-authentication using SNMP. Most NAS implement this MIB just
> people > seem to overlook it...> > Regards,> Arran> > > -- > Arran
> Cudbard-Bell ([EMAIL PROTECTED])> Authentication, Authorisation and
> Accounting Officer> Infrastructure Services | ENG1 E1-1-08 > University Of
> Sussex, Brighton> EXT:01273 873900 | INT: 3900> > -> List
> info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
_________________________________________________________________
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
