Thanks. I will definitely upgrade to 2.0.2. As far as the Cisco config, its pretty much the standard aaa authentication commands to enable radius authentication, the most relevant one to this problem being the "aaa authorization exec radius if-authenticated" command is definitely there. Nothing else special, as I said just the standard commands to enable radius authentication.
Joe [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 02/27/2008 05:15 PM Please respond to FreeRadius users mailing list <[email protected]> To FreeRadius users mailing list <[email protected]> cc Subject Re: Help With Cisco Configuration Hi, > I am trying to get a freeradius implementation rolled out for the first > time and am running into a few issues that I cannot seem to resolve. I > have a Cisco 2960 in a test lab with a Linux server running freeradius > 2.0.0 for authentication. There are 2 problems I am running into. 1) use 2.0.2 2) you didnt supply your cisco IOS config - but there again, this isnt the cisco support mailing list - your problems seem to arise from a lack of the required 802.1x commands in the IOS config - especially the ones relating to authorization alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
