Added that, no difference. How do I put it in the request too?
Thanks David -----Original Message----- From: Ivan Kalik [mailto:[EMAIL PROTECTED] Sent: 04 March 2008 10:35 To: FreeRadius users mailing list Subject: RE: Cisco AVpairs again. Ah, there is no Service-Type in your reply. It should be Service-Type = NAS-Prompt-User. Service type should be in the request too so make sure it is this one. Ivan Kalik Kalik Informatika ISP Dana 4/3/2008, "David Bell" <[EMAIL PROTECTED]> piše: >Thanks for the raply Ivan - sorry to keep dragging this up. > >I have another user configured as lvl 15 - heres the output from freeRADIUS > >Login OK: [tom/pass1] (from client 212.95.252.0/24 port 0) >Sending Access-Accept of id 13 to 212.95.252.25 port 43419 > Reply-Message = "You now have level 15 access as part of the SMC >Group\n" > Cisco-AVPair = "shell:priv-lvl=15" >Finished request 1. > >And on the cisco > >Username: tom >Password: >You now have level 15 access as part of the SMC Group > > >Switch> >16:46:33: RADIUS: Pick NAS IP for u=0x3C8D3A0 tableid=0 cfg_addr=0.0.00 >16:46:33: RADIUS: ustruct sharecount=1 >16:46:33: Radius: radius_port_info() success=1 radius_nas_port=1 >16:46:33: RADIUS: added cisco VSA 2 len 4 "tty0" >16:46:33: RADIUS: Received from id 1645/13 212.95.255.242:1812, >Access-Accept, len 101 >16:46:33: RADIUS: saved authorization data for user 3C8D3A0 at 3D46150 >Switch>sh priv >Current privilege level is 1 > >heres the AAA config of the Cisco > >aaa new-model >aaa authentication login default group radius local >aaa authentication login radius-login group radius local >aaa authorization exec default none >aaa authorization network default group radius none > >and the RADIUS config > >radius-server host 212.95.255.242 auth-port 1812 acct-port 1813 timeout 3 >retransmit 3 key testing >radius-server source-ports 1645-1646 >radius-server vsa send accounting >radius-server vsa send authentication > >Thanks again > >David > > > > > >-----Original Message----- >From: Ivan Kalik [mailto:[EMAIL PROTECTED] >Sent: 04 March 2008 09:58 >To: FreeRadius users mailing list >Subject: Re: Cisco AVpairs again. > > >Have you configured that priv level? Only 1 and 15 are configured by >default. > >Ivan Kalik >Kalik Informatika ISP > > >Dana 4/3/2008, "David Bell" <[EMAIL PROTECTED]> piše: > >>Hi folks, same david Bell, different email address :) >> >>Well I now have RADIUS and Cisco working pretty much as I want. >> >>However it seems to be passing the AVPair stuff back, but the Cisco doesnt >>seem to recognise it. >> >>Where have I gone wrong. >> >>My Users file has the following >> >>DEFAULT Ldap-Group == "SMC7", Auth-Type := Accept >> Reply-Message = "You now have level 7 access as part of the SMC >>Group\n", >> cisco-avpair = "shell:priv-lvl=7" >> >>When I log in I see freeRADIUS reply with the relevent parts >> >>++[ldap] returns ok >>++[expiration] returns noop >>++[logintime] returns noop >>rlm_pap: Found existing Auth-Type, not changing it. >>++[pap] returns noop >> rad_check_password: Found Auth-Type Accept >> rad_check_password: Auth-Type = Accept, accepting the user >>Login OK: [bob/pass1] (from client 212.95.252.0/24 port 0) >>Sending Access-Accept of id 10 to 212.95.252.25 port 39111 >> Reply-Message = "You now have level 7 access as part of the SMC >>Group\n" >> Cisco-AVPair = "shell:priv-lvl=7" >>Finished request 0. >>Going to the next request >>Waking up in 0.9 seconds. >>Waking up in 4.0 seconds. >>Cleaning up request 0 ID 10 with timestamp +7 >>Ready to process requests. >> >>With verbose RADIUS debugging on the Cisco >> >>Username: bob >>Password: >>You now have level 7 access as part of the SMC Group >> >> >>Switch> >>16:10:20: RADIUS: Pick NAS IP for u=0x3C8D5F8 tableid=0 cfg_addr=0.0.00 >>16:10:20: RADIUS: ustruct sharecount=1 >>16:10:20: Radius: radius_port_info() success=1 radius_nas_port=1 >>16:10:20: RADIUS: added cisco VSA 2 len 4 "tty0" >>16:10:20: RADIUS: Received from id 1645/10 212.95.255.242:1812, >>Access-Accept, len 99 >>16:10:20: RADIUS: saved authorization data for user 3C8D5F8 at 3CD2348 >> >>When I ask the cisco for the current privilege level >> >>Switch>show priv >>Current privilege level is 1 >> >>Anyone got any pointers? >> >>David >> >> >> >> >> >> >> >> >> >>- >>List info/subscribe/unsubscribe? See >http://www.freeradius.org/list/users.html >> >> > >- >List info/subscribe/unsubscribe? See >http://www.freeradius.org/list/users.html > > > > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
