>if I use dialupadmin to define the NAS client it doesnt allow >connections from my nas client. >
There is a setting at the end of sql.conf that enables reading from the nas table. >this is what I get with client.conf when I define the NAS in client.conf > >rad_recv: Access-Request packet from host 192.168.0.76 port 1030, id=24, >length=198 >NAS-Port-Type = Ethernet >Calling-Station-Id = "00:13:E8:CD:E5:53" >Called-Station-Id = "hotspot1" >NAS-Port-Id = "wlan1" >User-Name = "radiustest" >NAS-Port = 2149580824 >Acct-Session-Id = "80200018" >Framed-IP-Address = 10.5.50.252 >Mikrotik-Host-IP = 10.5.50.252 >CHAP-Challenge = 0x0bed27589fa8f959ea6d4b6560dedff9 >CHAP-Password = 0x112fa41a1c851ea19d378c120de246d86f >Service-Type = Login-User >WISPr-Logoff-URL = "http://10.5.50.1/logout"; >NAS-Identifier = "MikroTik" >NAS-IP-Address = 192.168.0.76 OK. So You are doing CHAP. That requires a cleartext password. And you have this: >+----+------------+---------------+----+------------------------------------+ >| id | username | attribute | op | value | >+----+------------+---------------+----+------------------------------------+ >| 1 | radiustest | User-Password | := | >$1$fj5Vw2PC$saaupvvPwVxAyIJaY9Em6. | >+----+------------+---------------+----+------------------------------------+ >1 row in set (0.00 sec) > 1. That's not a cleartext password. It's encrypted. 2. You should use Cleartext-Password as the password attribute as debug suggests. Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
