My setup is as follows and I am trying to do WPA2 EAP-TLS
authentication on an Apple Airport WLAN:
Fedora 8
Freeradius (192.168.1.26)
Airport Express (192.168.1.23) - WPA2
I do not seem to be seeing eap messages in debug mode. Would
appreciate some assistance if possible.
--REJECTED USER
rad_recv: Access-Request packet from host 192.168.1.23:1812, id=88,
length=73
User-Password = "testing123"
User-Name = "0019w3-h9a056"
NAS-Identifier = "192.168.1.23"
NAS-IP-Address = 192.168.1.23
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 229
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type Reject
rad_check_password: Auth-Type = Reject, rejecting user
auth: Failed to validate the user.
--clients.conf
client 192.168.1.23 {
secret = testing123
shortname = wireless_ap1
nastype = other
}
-eap.conf
eap {
default_eap_type = tls
timer_expire = 60
ignore_unknown_eap_types = no
md5 {
}
tls {
private_key_password = secret
private_key_file = /etc/raddb/certs/CA/RADIUS-key.pem
certificate_file = /etc/raddb/certs/CA/RADIUS-cert.pem
CA_file = /etc/raddb/certs/CA/cacert.pem
dh_file = /etc/wireless/dh
random_file = /etc/wireless/random
fragment_size = 1024
include_length = yes
cipher_list = "DEFAULT"
}
-users
Left as default, as EAP-TLS authentication are done automatically?
--DEBUG
[EMAIL PROTECTED] raddb]# radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/eap.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: snmp = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 1812
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "radiusd"
main: group = "radiusd"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "tls"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/etc/raddb/certs/CA/RADIUS-key.pem"
tls: certificate_file = "/etc/raddb/certs/CA/RADIUS-cert.pem"
tls: CA_file = "/etc/raddb/certs/CA/cacert.pem"
tls: private_key_password = "secret"
tls: dh_file = "/etc/wireless/dh"
tls: random_file = "/etc/wireless/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
tls: cipher_list = "DEFAULT"
tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
ttls: default_eap_type = "md5"
ttls: copy_request_to_tunnel = no
ttls: use_tunneled_reply = no
rlm_eap: Loaded and initialized type ttls
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/
detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
Regards
secrookie
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
