I've to set up my FR to let a User telnet into my Cisco Router. Whithout further contact to my client until Friday, I will test my environment in advance.
Accepting a session using this attributes will work fine. I'll get an IP and can connect to the router using telnet. Session-Timeout : 14400 Idle-Timeout : 600 AVPair : ip:wins-servers=10.1.1.223 Framed-IP-Address : 10.1.7.150 AVPair : ip:dns-servers=145.253.2.11 but accepting a session using the following attributes fails to connect. Login-IP-Host : 10.1.7.201 Framed-IP-Address : 10.1.7.155 Login-Service : Telnet Login-TCP-Port : 23 What application might I use to test this environment using a Windows XP system? I thought I have to dialup the normal way and then start my Telnet Client to configure the router? If I configure my dialup settings to use PPP, I got refused/disconnectes emmediately If I configure my dialup settings to use SLIP, I will be disconnected after about 22s. What is the expected differnece or the advantage of using Login-Service=Telnet? Thank You. Regards Stefan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
