OK. I can see it instantiated. But you would need unlang to call it as
there is nothing to set the Auth-Type.
There is another way in dealing with pap requests to AD avoiding
ntlm_auth. Uncomment Auth-Type {ldap} in authenticate section and change:
set_auth_type = no
to yes in ldap configuration. Then you can do ldap "bind as user"
authentication for pap requests.
Ivan Kalik
Kalik Informatika ISP
Dana 4/4/2008, "Charles Jones" <[EMAIL PROTECTED]> piše:
>2008/4/3 Ivan Kalik <[EMAIL PROTECTED]>:
>> Send the debug with ntlm_auth listed in authenticate section. Does
>> ntlm_auth appear on the debug after eap?
>
>I see no mention of ntlm_auth outside of the mschap module anywhere in the
>logs.
>
>I've attached full debug output, and my current sites-enabled/default
>config as well to ensure there is minimal confusion.
>
>Thank you,
>
>Charles Jones
>
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
