-----Forwarded Message----- >From: Hoa But <[EMAIL PROTECTED]> >Sent: May 29, 2008 12:13 PM >To: freeradius-users@lists.freeradius.org >Cc: [EMAIL PROTECTED] >Subject: Invalid user (rlm_ldap: Access Attribute denies access) - Digest >Authentication With FreeRADIUS and OpenLDAP > >Hello, > >Thank you for your support. > >I am getting "Invalid user (rlm_ldap: Access Attribute denies access)" when >authenticating against >OpenLDAP. I can pull up the authentication credentials with OpenLDAP clients >against the OpenLDAP server separately fine. >The cleartext User-Password is in OpenLDAP. > >Any assistance is greatly appreciated. The debugging messages are below. > >Thank you and best regards, > >Hoa > > >------------------------------------------------------ > >[EMAIL PROTECTED] ~]# radiusd -X >Starting - reading configuration files ... >reread_config: reading radiusd.conf >Config: including file: /etc/raddb/proxy.conf >Config: including file: /etc/raddb/clients.conf >Config: including file: /etc/raddb/snmp.conf >Config: including file: /etc/raddb/eap.conf > main: prefix = "/usr" > main: localstatedir = "/var" > main: logdir = "/var/log/radius" > main: libdir = "/usr/lib" > main: radacctdir = "/var/log/radius/radacct" > main: hostname_lookups = no > main: snmp = no > main: max_request_time = 5 > main: cleanup_delay = 5 > main: max_requests = 10240 > main: delete_blocked_requests = 0 > main: port = 0 > main: allow_core_dumps = no > main: log_stripped_names = yes > main: log_file = "/var/log/radius/radius.log" > main: log_auth = yes > main: log_auth_badpass = yes > main: log_auth_goodpass = no > main: pidfile = "/var/run/radiusd/radiusd.pid" > main: user = "radiusd" > main: group = "radiusd" > main: usercollide = no > main: lower_user = "no" > main: lower_pass = "no" > main: nospace_user = "no" > main: nospace_pass = "no" > main: checkrad = "/usr/sbin/checkrad" > main: proxy_requests = no > proxy: retry_delay = 5 > proxy: retry_count = 3 > proxy: synchronous = no > proxy: default_fallback = yes > proxy: dead_time = 120 > proxy: post_proxy_authorize = no > proxy: wake_all_if_all_dead = no > security: max_attributes = 200 > security: reject_delay = 1 > security: status_server = no > main: debug_level = 0 >read_config_files: reading dictionary >read_config_files: reading naslist >Using deprecated naslist file. Support for this will go away soon. >read_config_files: reading clients >read_config_files: reading realms >radiusd: entering modules setup >Module: Library search path is /usr/lib >Module: Loaded exec > exec: wait = yes > exec: program = "(null)" > exec: input_pairs = "request" > exec: output_pairs = "(null)" > exec: packet_type = "(null)" >rlm_exec: Wait=yes but no output defined. Did you mean output=none? >Module: Instantiated exec (exec) >Module: Loaded expr >Module: Instantiated expr (expr) >Module: Loaded PAP > pap: encryption_scheme = "crypt" > pap: auto_header = yes >Module: Instantiated pap (pap) >Module: Loaded CHAP >Module: Instantiated chap (chap) >Module: Loaded MS-CHAP > mschap: use_mppe = yes > mschap: require_encryption = no > mschap: require_strong = no > mschap: with_ntdomain_hack = no > mschap: passwd = "(null)" > mschap: ntlm_auth = "(null)" >Module: Instantiated mschap (mschap) >Module: Loaded DIGEST >Module: Instantiated digest (digest) >Module: Loaded System > unix: cache = no > unix: passwd = "(null)" > unix: shadow = "/etc/shadow" > unix: group = "(null)" > unix: radwtmp = "/var/log/radius/radwtmp" > unix: usegroup = no > unix: cache_reload = 600 >Module: Instantiated unix (unix) >Module: Loaded LDAP > ldap: server = "ldap://localhost" > ldap: port = 389 > ldap: net_timeout = 1 > ldap: timeout = 4 > ldap: timelimit = 3 > ldap: identity = "cn=manager,dc=test,dc=com" > ldap: tls_mode = no > ldap: start_tls = no > ldap: tls_cacertfile = "(null)" > ldap: tls_cacertdir = "(null)" > ldap: tls_certfile = "(null)" > ldap: tls_keyfile = "(null)" > ldap: tls_randfile = "(null)" > ldap: tls_require_cert = "allow" > ldap: password = "qchat123" > ldap: basedn = "dc=test,dc=com" > ldap: filter = "(uid=%u)" > ldap: base_filter = "(objectclass=radiusprofile)" > ldap: default_profile = "(null)" > ldap: profile_attribute = "radiusProfileDn" > ldap: password_header = "(null)" > ldap: password_attribute = "userPassword" > ldap: access_attr = "dialupAccess" > ldap: groupname_attribute = "cn" > ldap: groupmembership_filter = > "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" > ldap: groupmembership_attribute = "(null)" > ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap" > ldap: ldap_debug = 40 > ldap: ldap_connections_number = 5 > ldap: compare_check_items = no > ldap: access_attr_used_for_allow = yes > ldap: do_xlat = yes > ldap: set_auth_type = yes >rlm_ldap: Registering ldap_groupcmp for Ldap-Group >rlm_ldap: Registering ldap_xlat with xlat_name ldap >rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap >rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ >rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ >rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type >rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use >rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id >rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id >rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password >rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password >rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT >rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration >rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address >rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type >rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol >rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address >rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask >rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route >rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing >rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id >rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU >rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression >rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host >rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service >rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port >rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number >rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id >rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network >rlm_ldap: LDAP radiusClass mapped to RADIUS Class >rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout >rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout >rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action >rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service >rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node >rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group >rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link >rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS >Framed-AppleTalk-Network >rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone >rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit >rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port >rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message >conns: 0x99eef30 >Module: Instantiated ldap (ldap) >Module: Loaded eap > eap: default_eap_type = "md5" > eap: timer_expire = 60 > eap: ignore_unknown_eap_types = no > eap: cisco_accounting_username_bug = no >rlm_eap: Loaded and initialized type md5 >rlm_eap: Loaded and initialized type leap > gtc: challenge = "Password: " > gtc: auth_type = "PAP" >rlm_eap: Loaded and initialized type gtc > mschapv2: with_ntdomain_hack = no >rlm_eap: Loaded and initialized type mschapv2 >Module: Instantiated eap (eap) >Module: Loaded preprocess > preprocess: huntgroups = "/etc/raddb/huntgroups" > preprocess: hints = "/etc/raddb/hints" > preprocess: with_ascend_hack = no > preprocess: ascend_channels_per_line = 23 > preprocess: with_ntdomain_hack = no > preprocess: with_specialix_jetstream_hack = no > preprocess: with_cisco_vsa_hack = no > preprocess: with_alvarion_vsa_hack = no >Module: Instantiated preprocess (preprocess) >Module: Loaded realm > realm: format = "suffix" > realm: delimiter = "@" > realm: ignore_default = no > realm: ignore_null = no >Module: Instantiated realm (suffix) >Module: Loaded files > files: usersfile = "/etc/raddb/users" > files: acctusersfile = "/etc/raddb/acct_users" > files: preproxy_usersfile = "/etc/raddb/preproxy_users" > files: compat = "no" >Module: Instantiated files (files) >Module: Loaded Acct-Unique-Session-Id > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, > Client-IP-Address, NAS-Port" >Module: Instantiated acct_unique (acct_unique) >Module: Loaded detail > detail: detailfile = > "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > detail: detailperm = 384 > detail: dirperm = 493 > detail: locking = no >Module: Instantiated detail (detail) >Module: Loaded radutmp > radutmp: filename = "/var/log/radius/radutmp" > radutmp: username = "%{User-Name}" > radutmp: case_sensitive = yes > radutmp: check_with_nas = yes > radutmp: perm = 384 > radutmp: callerid = yes >Module: Instantiated radutmp (radutmp) >Listening on authentication *:1812 >Listening on accounting *:1813 >Ready to process requests. >rad_recv: Access-Request packet from host 10.8.140.21:7251, id=201, length=306 > User-Name = "[EMAIL PROTECTED]" > NAS-Identifier = "qcs-qchat-ops-2-3.qln.test.com.(none)" > NAS-Port-Type = Virtual > Service-Type = 200 > Digest-Response = "b7b36bac8060d1688fdb3a4e7d4bceb9" > Digest-Attributes = 0x010e7175616c636f6d6d2e636f6d > Digest-Attributes = > 0x02226632396366616434303130323732653337333162393237626266373665333462 > Digest-Attributes = 0x031051434841542d5245474953544552 > Digest-Attributes = 0x040e7175616c636f6d6d2e636f6d > Digest-Attributes = 0x050661757468 > Digest-Attributes = 0x060a4d44352d73657373 > Digest-Attributes = > 0x08226665386661626333396437613030616230626335616130373963393635633530 > Digest-Attributes = 0x090331 > Digest-Attributes = 0x0a18706f70736666613634407175616c636f6d6d2e636f6d > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "chap" returns noop for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 >rlm_digest: Adding Auth-Type = DIGEST > modcall[authorize]: module "digest" returns ok for request 0 > rlm_realm: Looking up realm "test.com" for User-Name = "[EMAIL PROTECTED]" > rlm_realm: No such realm "test.com" > modcall[authorize]: module "suffix" returns noop for request 0 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 0 > users: Matched entry [EMAIL PROTECTED] at line 103 > modcall[authorize]: module "files" returns ok for request 0 >rlm_ldap: - authorize >rlm_ldap: performing user authorization for [EMAIL PROTECTED] >radius_xlat: '([EMAIL PROTECTED])' >radius_xlat: 'dc=test,dc=com' >rlm_ldap: ldap_get_conn: Checking Id: 0 >rlm_ldap: ldap_get_conn: Got Id: 0 >rlm_ldap: attempting LDAP reconnection >rlm_ldap: (re)connect to ldap://localhost, authentication 0 >rlm_ldap: could not set LDAP_OPT_X_TLS_REQUIRE_CERT option to allow >rlm_ldap: bind as cn=manager,dc=test,dc=com/qchat123 to ldap://localhost >rlm_ldap: waiting for bind result ... >request 1 done >rlm_ldap: Bind was successful >rlm_ldap: performing search in dc=test,dc=com, with filter ([EMAIL PROTECTED]) >request 2 done >rlm_ldap: no dialupAccess attribute - access denied by default >rlm_ldap: ldap_release_conn: Release Id: 0 > modcall[authorize]: module "ldap" returns userlock for request 0 >modcall: leaving group authorize (returns userlock) for request 0 >Invalid user (rlm_ldap: Access Attribute denies access): [EMAIL PROTECTED]/<no >User-Password attribute>] (from client qcs-qchat-ops-2-3 port 0) >Delaying request 0 for 1 seconds >Finished request 0 >Going to the next request >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Sending Access-Reject of id 201 to 10.8.140.21 port 7251 >Waking up in 4 seconds... >--- Walking the entire request list --- >Cleaning up request 0 ID 201 with timestamp 483cb7b5 >Nothing to do. Sleeping until we see a request. >rad_recv: Access-Request packet from host 10.8.140.21:7252, id=195, length=306 > User-Name = "[EMAIL PROTECTED]" > NAS-Identifier = "qcs-qchat-ops-2-3.qln.test.com.(none)" > NAS-Port-Type = Virtual > Service-Type = 200 > Digest-Response = "a4ebf865f9abea9d590bdd95f5d81f5e" > Digest-Attributes = 0x010e7175616c636f6d6d2e636f6d > Digest-Attributes = > 0x02223464303339383763636661353637393938326461323237313735656638663930 > Digest-Attributes = 0x031051434841542d5245474953544552 > Digest-Attributes = 0x040e7175616c636f6d6d2e636f6d > Digest-Attributes = 0x050661757468 > Digest-Attributes = 0x060a4d44352d73657373 > Digest-Attributes = > 0x08226530653061383666616133656238643532313161376636326133653662303937 > Digest-Attributes = 0x090331 > Digest-Attributes = 0x0a18706f70736666613634407175616c636f6d6d2e636f6d > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 1 > modcall[authorize]: module "preprocess" returns ok for request 1 > modcall[authorize]: module "chap" returns noop for request 1 > modcall[authorize]: module "mschap" returns noop for request 1 >rlm_digest: Adding Auth-Type = DIGEST > modcall[authorize]: module "digest" returns ok for request 1 > rlm_realm: Looking up realm "test.com" for User-Name = "[EMAIL PROTECTED]" > rlm_realm: No such realm "test.com" > modcall[authorize]: module "suffix" returns noop for request 1 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 1 > users: Matched entry [EMAIL PROTECTED] at line 103 > modcall[authorize]: module "files" returns ok for request 1 >rlm_ldap: - authorize >rlm_ldap: performing user authorization for [EMAIL PROTECTED] >radius_xlat: '([EMAIL PROTECTED])' >radius_xlat: 'dc=test,dc=com' >rlm_ldap: ldap_get_conn: Checking Id: 0 >rlm_ldap: ldap_get_conn: Got Id: 0 >rlm_ldap: performing search in dc=test,dc=com, with filter ([EMAIL PROTECTED]) >request 3 done >rlm_ldap: no dialupAccess attribute - access denied by default >rlm_ldap: ldap_release_conn: Release Id: 0 > modcall[authorize]: module "ldap" returns userlock for request 1 >modcall: leaving group authorize (returns userlock) for request 1 >Invalid user (rlm_ldap: Access Attribute denies access): [EMAIL PROTECTED]/<no >User-Password attribute>] (from client qcs-qchat-ops-2-3 port 0) >Delaying request 1 for 1 seconds >Finished request 1 >Going to the next request >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Sending Access-Reject of id 195 to 10.8.140.21 port 7252 >Waking up in 4 seconds... >--- Walking the entire request list --- >Cleaning up request 1 ID 195 with timestamp 483cb7c0 >Nothing to do. Sleeping until we see a request. > >---------------------------------------------------------------------------
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html