Did you put use-tunneled-reply=yes in peap config? I also can't see freeradius config files.
Ivan Kalik Kalik Informatika ISP Dana 10/6/2008, "Krzysztof Olędzki" <[EMAIL PROTECTED]> piše: >On 2008-06-10 16:51, Gennadiy Redko wrote: >> Krzysztof OlÄ�dzki пиŃ�ĐľŃ�: >>> On 2008-06-10 14:45, Gennadiy Redko wrote: >>>> Krzysztof OlÄ�dzki ?????: >>>> >>>>> I guess it works because it is properly configured. 3Com may also >>>>> work if you setup it with (a blind guess): >>>>> >>>>> domain (...) >>>>> vlan-assignment-mode string >>>>> accounting optional >>>>> >>>> It is updated firmware up to V3.03.01s56e. >>> Any reason you did not select a s168 version? >>> >> >> We do not apply encrypting. Though I too would choose a variant with >> a long key. Probably my colleague - the minimalist... >> >>>> The config under your recommendations is changed. >>>> Does not work. >>> OK, we absolutely need some more info: >>> >>> - display vlan >>> - display vlan ... (2?) >>> - display interface ... (G7/0/40?) >>> - display port-security interface ... (G7/0/40) >> >> I have opened bugreport: >> http://bugs.freeradius.org/show_bug.cgi?id=563 >> Here the reference to a full config of the switch: >> http://bugs.freeradius.org/showattachment.cgi?attach_id=267 > >I'm not able to locate the output of above commands there. > >Best regards, > > Krzysztof OlÄ�dzki > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
