admin:x:500:500::/home/admin:/bin/bash That x means that you have assigned a password for this account. It's in /etc/shadow.
Ivan Kalik Kalik Informatika ISP Dana 17/6/2008, "Guk Viktor" <[EMAIL PROTECTED]> piše: > > > > > > >Prompt, what to make in that case. In the file /etc/passwd there is >this line of " admin:x:500:500::/home/admin:/bin/bash ". How it >is necessary to assign password? > > >Message: 4 >Date: Tue, 17 Jun 2008 09:33:31 +0100 >From: "Ivan Kalik" <[EMAIL PROTECTED]> >Subject: Re: Problem in connecting to switch on telnet >To: "FreeRadius users mailing list" > <[email protected]> >Message-ID: <[EMAIL PROTECTED]> >Content-Type: text/plain; charset=ISO-8859-2 > >You have deleted the part of the debug which tells how is Auth-Type set. >Post the whole thing. BTW, now you do have admin account in /etc/passwd >but the password is wrong. It's still not using password from the users >file. > >Ivan Kalik >Kalik Informatika ISP > > >Dana 17/6/2008, "Guk Viktor" <[EMAIL PROTECTED]> pi?e: > > > > It tried without Auth-Type = System, also tried Auth-Type = Local. > >Processing the authenticate section of radius.conf >modcall: entering group authenticate for request 0 >rlm_unix: [admin]: invalid password >modcall[authenticate]: module "unix" returns reject for request 0 >modcall: leaving group authenticate (returns reject) for request 0 >auth: Failed to validate the user. >Login incorrect: [admin/admin] (from client 10.0.1.2 port 117612545 cli >0000-0000-0000) > > > Message: 4 Date: Fri, 13 Jun 2008 15:38:57 +0100 From: "Ivan Kalik" ><[EMAIL PROTECTED]> Subject: Re: Problem in connecting to switch on telnet >To: "FreeRadius users mailing list" ><[email protected]> Message-ID: ><[EMAIL PROTECTED]> Content-Type: >text/plain; charset=ISO-8859-2 You are setting up the wrong >authentication type. Remove Auth-Type =System from user configuration. >1.1.3 is old. I am not sure do you need to set Auth-Type there. If it >doesn't work without it set Auth-Type = Local. Ivan Kalik Kalik >Informatika ISP Dana 13/6/2008, "Guk Viktor" <[EMAIL PROTECTED]> pi?e: > > > > > > > > >Hello, > >I have freeradius-1.1.3 and 3com switch 5500-EI. On the >switch is disposed the access of users into the network through >freeradius. Arose problem in >connecting to switch on telnet. In the log freeradius it is indicated >that the incorrect password (however password I introduce correctly). > >rad_recv: Access-Request packet from host 10.0.1.2:5007, id=1, >length=203 >??????? User-Name = "admin" >??????? User-Password = "admin" >??????? NAS-IP-Address = 10.0.1.2 >??????? NAS-Identifier = "001ac1d4ee42" >??????? NAS-Port = 117612545 >??????? NAS-Port-Id = "unit=7;subslot=0;port=42;vlanid=1" >??????? NAS-Port-Type = Ethernet >??????? Service-Type = Login-User >??????? Login-IP-Host = 10.0.1.2 >??????? Calling-Station-Id = "0000-0000-0000" >??????? Framed-IP-Address = 10.0.1.100 >??????? Vendor-25506-Attr-26 = 0x00000003 >??????? Vendor-25506-Attr-255 = 0x353530302d4549 >??????? Vendor-25506-Attr-60 = >0x31302e302e312e3130302030303a30303a30303a30303a30303a3030 >??????? Vendor-25506-Attr-59 = 0x38e68c68 >? Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 0 >? modcall[authorize]: module "mschap" returns noop for request 0 >??? rlm_realm: No '\' in User-Name = "admin", looking up realm NULL >??? rlm_realm: No such realm "NULL" >? modcall[authorize]: module "ntdomain" returns noop for request 0 >? rlm_eap: No EAP-Message, not doing EAP >? modcall[authorize]: module "eap" returns noop for request 0 >??? users: Matched entry DEFAULT at line 152 >??? users: Matched entry admin at line 216 >? modcall[authorize]: module "files" returns ok for request 0 >modcall: leaving group authorize (returns ok) for request 0 >? rad_check_password:? Found Auth-Type System >auth: type "System" >? Processing the authenticate section of >radiusd.conf >modcall: entering group authenticate for request 0 >? modcall[authenticate]: module "unix" returns notfound for request 0 >modcall: leaving group authenticate (returns notfound) for request 0 >auth: Failed to validate the user. >Login incorrect: [admin/admin] (from >client 10.0.1.2 port 117612545 cli 0000-0000-0000) >Delaying request 0 for 1 seconds >Finished request 0 > >Users: >admin?? Auth-Type = System, User-Password == "admin" >??? ?? 3Com-User-Access-Level = Administrator > >eap.conf: >eap{ >??? default_eap_type = peap >??? timer_expire = 60 >??? ignore_unknown_eap_type = no >??? cisco_accounting_username_bug = no >??? >??? md5{ >??? ?? } > >??? leap{ >??? ?? } > >??? gtc{ >??? ?? auth_type = PAP >??? ?? } > >??? peap{ >??? ?? default_eap_type = mschapv2 >??? ?? use_tunneled_reply = yes >??? ?? } > >??? mschapv2{ >??? ?? } >??? } > >It can possibly use a local authorization to switch on telnet, >without freeradius. > >Viktor Guk > > > > > > - >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > > > > > > > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
