You have a full debug of accepted peap authentication via ntlm_auth posted today:
http://lists.freeradius.org/pipermail/freeradius-users/2008-July/msg00149.html Your supplicant is most likely broken. Find out why it gave up and fix it. Ivan Kalik Kalik Informatika ISP Dana 7/7/2008, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> piše: >Hmm, it is in fact doing many access-challenges, but the one I have sent it >the last one... There is no access-accept (and no reject). > > >Dietmar > > >-------- Original-Nachricht -------- >> Datum: Mon, 07 Jul 2008 15:29:24 +0100 >> Von: "Ivan Kalik" <[EMAIL PROTECTED]> >> An: "FreeRadius users mailing list" <[email protected]> >> Betreff: Re: EAP/peap: MSCHAP Success > >> That's because it's doing EAP mschapv2 not plain mschap. It's normal >> to get a couple more Challenge-Requests before process is over. >> >> Ivan Kalik >> Kalik Informatika ISP >> >> >> Dana 7/7/2008, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> pi¨e: >> >> >Hello, >> > >> >I have some problems with freeradius 2.0.5 and ntlm_auth: ntlm_auth seems >> to authenticate successful, but freeradius is sending another >> access-challenge istead of access-accept. Finally, authentication fails. >> > >> >Any ideas? >> > >> >Thanks, >> > Dietmar >> > >> > >> >rad_recv: Access-Request packet from host x.x.x.x port 32770, id=29, >> length=323 >> > User-Name = "xxxx" >> > Calling-Station-Id = "00-aa-aa-aa-aa-aa" >> > Called-Station-Id = "bb-bb-bb-bb-bb-bb:abcd" >> > NAS-Port = 29 >> > NAS-IP-Address = x.x.x.x >> > NAS-Identifier = "xxxx" >> > Airespace-Wlan-Id = 1 >> > Service-Type = Framed-User >> > Framed-MTU = 1300 >> > NAS-Port-Type = Wireless-802.11 >> > Tunnel-Type:0 = VLAN >> > Tunnel-Medium-Type:0 = IEEE-802 >> > Tunnel-Private-Group-Id:0 = "111" >> > EAP-Message = >> 0x020800901900170301002068300aa7af68cd11d993c8573581cfda02004335dd25b185c1caa58932f2c445170301006099a8478aa1f46aaee96b7280da1a3112f767ad35f728c5011d8328935379ce01eaf5a2b8bacd04a3ff66b08517d524b80e09809b94ae7720e5de155cb5d9ef20ffbd207bef659afb95d25c15b9898b401ff7eac15cd25109681c5150b976c6bc >> > State = 0x7641829c70499b7e3361ddd3f9666230 >> > Message-Authenticator = 0xc43073f681146021f4c82a9d2d1ce165 >> >+- entering group authorize >> >++[preprocess] returns ok >> >++[mschap] returns noop >> > rlm_realm: No '@' in User-Name = "xxxx", looking up realm NULL >> > rlm_realm: No such realm "NULL" >> >++[suffix] returns noop >> > rlm_eap: EAP packet type response id 8 length 144 >> > rlm_eap: Continuing tunnel setup. >> >++[eap] returns ok >> > rad_check_password: Found Auth-Type EAP >> >auth: type "EAP" >> >+- entering group authenticate >> > rlm_eap: Request found, released from the list >> > rlm_eap: EAP/peap >> > rlm_eap: processing type peap >> > rlm_eap_peap: Authenticate >> > rlm_eap_tls: processing TLS >> > eaptls_verify returned 7 >> > rlm_eap_tls: Done initial handshake >> > eaptls_process returned 7 >> > rlm_eap_peap: EAPTLS_OK >> > rlm_eap_peap: Session established. Decoding tunneled attributes. >> > rlm_eap_peap: EAP type mschapv2 >> > PEAP: Setting User-Name to yyyy\xxxx >> >+- entering group authorize >> >++[preprocess] returns ok >> >++[mschap] returns noop >> > rlm_realm: No '@' in User-Name = "yyyy\xxxx", looking up realm NULL >> > rlm_realm: No such realm "NULL" >> >++[suffix] returns noop >> > rlm_eap: EAP packet type response id 8 length 73 >> > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation >> >++[eap] returns updated >> > users: Matched entry DEFAULT at line 1 >> > users: Matched entry DEFAULT at line 460 >> >++[files] returns ok >> >++[expiration] returns noop >> >++[logintime] returns noop >> >rlm_pap: WARNING! No "known good" password found for the user. >> Authentication may fail because of this. >> >++[pap] returns noop >> > rad_check_password: Found Auth-Type EAP >> >auth: type "EAP" >> >+- entering group authenticate >> > rlm_eap: Request found, released from the list >> > rlm_eap: EAP/mschapv2 >> > rlm_eap: processing type mschapv2 >> >+- entering group MS-CHAP >> > rlm_mschap: No Cleartext-Password configured. Cannot create >> LM-Password. >> > rlm_mschap: No Cleartext-Password configured. Cannot create >> NT-Password. >> > rlm_mschap: Told to do MS-CHAPv2 for xxxx with NT-Password >> > expand: --domain=%{mschap:NT-Domain} -> --domain=yyyyyy >> > expand: --username=%{mschap:User-Name:-None} -> --username=xxxx >> > mschap2: b0 >> > expand: --challenge=%{mschap:Challenge:-00} -> >> --challenge=8fc3f2bd3e12c979 >> > expand: --nt-response=%{mschap:NT-Response:-00} -> >> --nt-response=9c59f2bc45acacb2fe7b4068cb014b9aed12664f7135d064 >> >Exec-Program output: NT_KEY: 09360732CEED74278E86C2D9A9EBB694 >> >Exec-Program-Wait: plaintext: NT_KEY: 09360732CEED74278E86C2D9A9EBB694 >> >Exec-Program: returned: 0 >> >rlm_mschap: adding MS-CHAPv2 MPPE keys >> >++[mschap] returns ok >> >MSCHAP Success >> >++[eap] returns handled >> > PEAP: Got tunneled Access-Challenge >> >++[eap] returns handled >> >Sending Access-Challenge of id 29 to x.x.x.x port 32770 >> > EAP-Message = >> 0x0109005b190017030100508b5c946b956210b83f4d4dc1110d22be38775b1fab7e98154dc59571b3e81b6d2f4c06139ebfbaeae78d6b41cd6ef643f1a67d56b96bf669bbb0aab6e6df36281122e5b85d6a1543990e7cd0d61523ed >> > Message-Authenticator = 0x00000000000000000000000000000000 >> > State = 0x7641829c71489b7e3361ddd3f9666230 >> >Finished request 17. >> >- >> >List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> > >> > >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
