Hi Ivan,
Here I want to ask for your advise. I have a server with two ethernets
connection.
Internet ------- [eth1] (DNS, DHCP server, Radius Server) Red Hat [eth0] -----
Wifi (Client)
If I plugin XP to eth0 (network line), the server will assign an IP
address to that computer and immediately able to connect to internet
(iptables redirect traffic to eth1).
then I try to authenticate the wifi client I wonder why the
NAS-IP-Address always show 0.0.0.0 but when I run radtest on terminal
server it shows IP address..
# radtest MarsNet 000 localhost 0 testing123
User-Name = MarsNet
User-Password = 000
NAS-IP-Address = 192.168.1.10 ( server IP address)
NAS-Port = 0
#
I guess this might be the problem causing the client fail to connect to
server. (Client never connected but instead showing "acquiring network
address")
Further for testing purpose if I want to switch the incoming authentication
through eth1, which ports shall I open?
In previous email you were mention about client attribute fail. How to fix it?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
