For some reason some systems process inner-tunnel virtual server before default. Since that server knows nothing about ntlm_auth this error occurs. Best solution is probably to add ntlm_auth to instatiate section of radiusd.conf as well. Just in case. And add that step to configuration instructions in the HOWTO.
Ivan Kalik Kalik Informatika ISP Dana 7/10/2008, "Santiago Matiz V" <[EMAIL PROTECTED]> piše: >Hi Alan, thank for your help > >I configured my users file with your direction : > >user Auth-Type := ntlm_auth > >DEFAULT Auth-Type = MSCHAP > Fall-Through = 1, > Reply-Message = "MsChap user" > > > >but when i run radiusd -X appears : > >"/usr/local/etc/raddb/users[1]: Parse error (check) for entry user: Unknown >value ntlm_auth for attribute Auth-Type" > > > > > > >Santiago Matiz ([EMAIL PROTECTED]) >Systems Engineer >Pontificia Universidad Javeriana >http://www.javeriana.edu.co >Bogotá, Colombia (South America) > > >--- On Tue, 10/7/08, Alan DeKok <[EMAIL PROTECTED]> wrote: > >> From: Alan DeKok <[EMAIL PROTECTED]> >> Subject: Re: NTLM_auth active directory - what is wrong? >> To: [EMAIL PROTECTED], "FreeRadius users mailing list" >> <[email protected]> >> Date: Tuesday, October 7, 2008, 3:24 PM >> Santiago Matiz V wrote: >> > Syed thanks for your answer, when i configure the file >> "users" with "ntlm_auth" appears the >> error : >> > >> > "/usr/local/etc/raddb/users[230]: Parse error >> (check) for entry DEFAULT: Unknown value ntlm_auth for >> attribute Auth-Type >> > Errors reading /usr/local/etc/raddb/users" >> >> If it does that, it's because you haven't >> followed the guide. Among >> other things, the guide says to add the entry at the TOP of >> the "users" >> file. And you obviously haven't done that. >> >> Which files have you edited, and why? >> >> Alan DeKok. > > > > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
