Have you enabled sql in the accounting section? Can you post the freeradius debug (radiusd -X)? Accounting-Request should be coming straight after Access-Accept.
Ivan Kalik Kalik Informatika ISP Dana 28/10/2008, "lolo" <[EMAIL PROTECTED]> piše: >Hi, > >I am not member of the list, cause I never received any answer !??? >So write to my email ! > >Is someone have installing and configuring accounting with hostapd and >freeradius ? > >I have some problems to understand why my configuration doesn't save any data >in table "radacct" ? >I have some data in "radpostauth" : >1 bea Access-Accept 2008-10-28 00:14:57 >2 bea Access-Accept 2008-10-28 00:19:14 >.... > >My configuration is based on LDAP with SQL to store data... > >Here my configuration : >- On the same machine I have OpenLDAP+Hostapd+Freeradius >- authenticating works ! >- accounting request was send : (wireshark shoot) > >No. Time Source Destination Protocol Info > 10 4.520626 10.1.1.254 10.1.1.254 RADIUS >Accounting-Request(4) (id=242, l=194) > >Frame 10 (238 bytes on wire, 238 bytes captured) >Linux cooked capture >Internet Protocol, Src: 10.1.1.254 (10.1.1.254), Dst: 10.1.1.254 (10.1.1.254) >User Datagram Protocol, Src Port: 33080 (33080), Dst Port: radius-acct (1813) > Source port: 33080 (33080) > Destination port: radius-acct (1813) > Length: 202 > Checksum: 0x18d9 [incorrect, should be 0x7400] >Radius Protocol > Code: Accounting-Request (4) > Packet identifier: 0xf2 (242) > Length: 194 > Authenticator: 3A902C44595C10807918F491B63CDA2B > Attribute Value Pairs > AVP: l=19 t=Acct-Session-Id(44): 48F7C09B-00000021 > AVP: l=6 t=Acct-Status-Type(40): Stop(2) > AVP: l=6 t=Acct-Authentic(45): RADIUS(1) > AVP: l=5 t=User-Name(1): bea > AVP: l=6 t=NAS-IP-Address(4): 10.3.1.1 > AVP: l=8 t=NAS-Identifier(32): debian > AVP: l=6 t=NAS-Port(5): 0 > AVP: l=29 t=Called-Station-Id(30): 00-18-4D-76-22-19:Debian-AP > AVP: l=19 t=Calling-Station-Id(31): 00-1A-70-AE-D4-53 > AVP: l=6 t=NAS-Port-Type(61): Wireless-802.11(19) > AVP: l=22 t=Connect-Info(77): CONNECT 0Mbps 802.11 > AVP: l=6 t=Acct-Session-Time(46): 27 > AVP: l=6 t=Acct-Input-Packets(47): 63 > AVP: l=6 t=Acct-Output-Packets(48): 21 > AVP: l=6 t=Acct-Input-Octets(42): 7256 > AVP: l=6 t=Acct-Output-Octets(43): 3623 > AVP: l=6 t=Event-Timestamp(55): Oct 17, 2008 05:23:47.000000000 > AVP: l=6 t=Acct-Terminate-Cause(49): User-Request(1) > >Here where to find my all configuration : >http://www.system-linux.net/config/freeradius-ldap-hostapd/configuration/ > >Many thank's > >If my English is not perfect, it's because I'm not ! I am French ! ;) >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
