I used i386 version of SLES10SP1. Are you using that one or x86_64 version? If using the latter, try the former.
On Wed, Oct 29, 2008 at 3:01 PM, Hubert Kupper <[EMAIL PROTECTED]> wrote: > [EMAIL PROTECTED] schrieb: >> >> Hi, >> >> >>> >>> I have build the rpm's without errors. Before I had to edit the >>> freeradius.spec file and comment out autoreconf. >>> After radiusd -X I get the following errors: >>> >> >> yep - you build it without openssl-devel package installed - >> it clearly says in the log >> >> >>> >>> rlm_eap: Ignoring EAP-Type/tls because we do not have OpenSSL support. >>> rlm_eap: Ignoring EAP-Type/ttls because we do not have OpenSSL support. >>> rlm_eap: Ignoring EAP-Type/peap because we do not have OpenSSL support. >>> >> >> see. no OpenSSL support. >> >> install the openssl dev/headers package and rebuild >> >> >> alan >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> >> > > Hi, > > I reinstalled openssl and openssl-devel then I rebuild FR 2.1 but the > errors were the same. > Then I installed a FR 2.0.5 rpm which runs fine on OpenSuse 11.0 and get the > same errors. When I reinstall FR 1.6 then it works fine!! > > Boert > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
