Version: freeradius-2.1.1
I cannot get a redundant-load-balance set to work within a variable
expansion in the users file.
I added this to the bottom of the instantiate section of radiusd.conf:
redundant-load-balance redundant_ldap {
ldap1
ldap2
ldap3
}
and this to the authorize section of sites-enabled/default:
redundant_ldap
and I defined the 3 ldap instances in modules/ldap, and this part
works fine.
But I cannot figure out how to reference redundant_ldap from within
the users file.
I tried
Connect-Info = "%{redundant_ldap:ldap:///dc=rice,dc=edu?riceClass?sub?uid=%u}";
but the debug output shows:
WARNING: Unknown module "redundant_ldap" in string expansion
"%{redundant_ldap:ldap:///dc=rice,dc=edu?riceClass?sub?uid=%u}";
I attached the start of the debug output. The whole output was over
the 100k limit.
Tod Sandman
Sr. Systems Administrator
Middleware Development & Integration
Rice University
Voice: 713.348.5816
FreeRADIUS Version 2.1.1, for host i686-pc-linux-gnu, built on Oct 16 2008 at
13:34:21
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/opt/freeradius/radiusd.conf
including configuration file /etc/opt/freeradius/proxy.conf
including configuration file /etc/opt/freeradius/clients.conf
including files in directory /etc/opt/freeradius/modules/
including configuration file /etc/opt/freeradius/modules/expr
including configuration file /etc/opt/freeradius/modules/smbpasswd
including configuration file /etc/opt/freeradius/modules/unix
including configuration file /etc/opt/freeradius/modules/mschap
including configuration file /etc/opt/freeradius/modules/preprocess
including configuration file /etc/opt/freeradius/modules/always
including configuration file /etc/opt/freeradius/modules/echo
including configuration file /etc/opt/freeradius/modules/krb5
including configuration file /etc/opt/freeradius/modules/checkval
including configuration file /etc/opt/freeradius/modules/passwd
including configuration file /etc/opt/freeradius/modules/sql_log
including configuration file /etc/opt/freeradius/modules/attr_filter
including configuration file /etc/opt/freeradius/modules/pap
including configuration file /etc/opt/freeradius/modules/logintime
including configuration file /etc/opt/freeradius/modules/perl
including configuration file /etc/opt/freeradius/modules/mac2vlan
including configuration file /etc/opt/freeradius/modules/pam
including configuration file /etc/opt/freeradius/modules/counter
including configuration file /etc/opt/freeradius/modules/ippool
including configuration file /etc/opt/freeradius/modules/detail.example.com
including configuration file /etc/opt/freeradius/modules/files
including configuration file /etc/opt/freeradius/modules/chap
including configuration file /etc/opt/freeradius/modules/inner-eap
including configuration file /etc/opt/freeradius/modules/attr_rewrite
including configuration file /etc/opt/freeradius/modules/detail
including configuration file /etc/opt/freeradius/modules/digest
including configuration file /etc/opt/freeradius/modules/radutmp
including configuration file /etc/opt/freeradius/modules/realm
including configuration file /etc/opt/freeradius/modules/mac2ip
including configuration file /etc/opt/freeradius/modules/ldap
including configuration file /etc/opt/freeradius/modules/linelog
including configuration file /etc/opt/freeradius/modules/exec
including configuration file /etc/opt/freeradius/modules/acct_unique
including configuration file /etc/opt/freeradius/modules/etc_group
including configuration file /etc/opt/freeradius/modules/sradutmp
including configuration file /etc/opt/freeradius/modules/expiration
including configuration file /etc/opt/freeradius/modules/policy
including configuration file /etc/opt/freeradius/modules/wimax
including configuration file /etc/opt/freeradius/modules/detail.log
including configuration file /etc/opt/freeradius/eap.conf
including configuration file /etc/opt/freeradius/policy.conf
including files in directory /etc/opt/freeradius/sites-enabled/
including configuration file /etc/opt/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/opt/freeradius/sites-enabled/req.txt
including configuration file /etc/opt/freeradius/sites-enabled/default
group = radius
user = radius
including dictionary file /etc/opt/freeradius/dictionary
main {
prefix = "/usr/site/freeradius-2.1.1"
localstatedir = "/var/opt/freeradius"
logdir = "/var/opt/freeradius"
libdir = "/usr/site/freeradius-2.1.1/lib"
radacctdir = "/var/opt/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/opt/freeradius/run/radiusd.pid"
checkrad = "/usr/site/freeradius-2.1.1/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = no
}
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 168.7.0.0/16 {
require_message_authenticator = no
secret = "whfgpoqasdzxmy3"
shortname = "rn2"
}
client 10.48.200.200 {
require_message_authenticator = no
secret = "whfgpoqasdzxry3"
shortname = "VPN"
}
client 10.48.200.201 {
require_message_authenticator = no
secret = "whfgpoqasdzxry3"
shortname = "VPN"
}
client 10.48.200.202 {
require_message_authenticator = no
secret = "whfgpoqasdzxry3"
shortname = "VPN"
}
client 10.0.94.4 {
require_message_authenticator = no
secret = "whfgpoqasdzxcy3"
shortname = "wireless0a"
}
client 10.0.94.5 {
require_message_authenticator = no
secret = "whfgpoqasdzxcy3"
shortname = "wireless0b"
}
client 10.4.94.4 {
require_message_authenticator = no
secret = "whfgpoqasdzxcy3"
shortname = "wireless4a"
}
client 10.4.94.5 {
require_message_authenticator = no
secret = "whfgpoqasdzxcy3"
shortname = "wireless4b"
}
client 10.8.94.4 {
require_message_authenticator = no
secret = "whfgpoqasdzxcy3"
shortname = "wireless8a"
}
client 10.8.94.5 {
require_message_authenticator = no
secret = "whfgpoqasdzxcy3"
shortname = "wireless8b"
}
client 10.12.94.4 {
require_message_authenticator = no
secret = "whfgpoqasdzxcy3"
shortname = "wireless12a"
}
client 10.12.94.5 {
require_message_authenticator = no
secret = "whfgpoqasdzxcy3"
shortname = "wireless12b"
}
client 10.4.93.0/24 {
require_message_authenticator = no
secret = "lomtesting123"
shortname = "lom4"
}
client 10.6.93.0/24 {
require_message_authenticator = no
secret = "lomtesting123"
shortname = "lom6"
}
client 10.7.93.0/24 {
require_message_authenticator = no
secret = "lomtesting123"
shortname = "lom7"
}
client 10.10.93.0/24 {
require_message_authenticator = no
secret = "lomtesting123"
shortname = "lom10"
}
client 10.12.93.0/24 {
require_message_authenticator = no
secret = "lomtesting123"
shortname = "lom12"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
ntlm_auth = "/usr/site/samba/bin/ntlm_auth --request-nt-key
--username=%{mschap:User-Name:-None} --domain=%{mschap:NT-Domain:-ADRICE}
--challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/opt/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "tls"
timer_expire = 120
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/opt/freeradius/certs/server.pem"
certificate_file = "/etc/opt/freeradius/certs/server.pem"
CA_file = "/etc/opt/freeradius/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/opt/freeradius/certs/dh"
random_file = "/etc/opt/freeradius/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/opt/freeradius/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/opt/freeradius/users"
acctusersfile = "/etc/opt/freeradius/acct_users"
preproxy_usersfile = "/etc/opt/freeradius/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/opt/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/opt/freeradius/attrs.access_reject"
key = "%{User-Name}"
}
}
}
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_krb5
Module: Instantiating krb5
krb5 {
keytab = "/etc/opt/heimdal/krb5.keytab"
service_principal = "radius/[EMAIL PROTECTED]"
}
rlm_krb5: krb5_init ok
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/opt/freeradius/huntgroups"
hints = "/etc/opt/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Loading virtual module redundant_ldap
Module: Linked to module rlm_ldap
Module: Instantiating ldap1
ldap ldap1 {
server = "hidden1.example.com"
port = 389
password = "CMRh<k=5"
identity = "cn=radius,ou=Service Accounts,dc=rice,dc=edu"
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "ou=People,dc=rice,dc=edu"
filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr = "riceClass"
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/opt/freeradius/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 10
compare_check_items = no
do_xlat = yes
set_auth_type = yes
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Creating new attribute ldap1-Ldap-Group
rlm_ldap: Registering ldap_groupcmp for ldap1-Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap1
rlm_ldap: Over-riding set_auth_type, as there is no module ldap1 listed in the
"authenticate" section.
rlm_ldap: reading ldap<->radius mappings from file
/etc/opt/freeradius/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
conns: 0x818f278
Module: Instantiating ldap2
ldap ldap2 {
server = "hidden2.example.com"
port = 389
password = "CMRh<k=5"
identity = "cn=radius,ou=Service Accounts,dc=rice,dc=edu"
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "ou=People,dc=rice,dc=edu"
filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr = "riceClass"
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/opt/freeradius/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 10
compare_check_items = no
do_xlat = yes
set_auth_type = yes
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Creating new attribute ldap2-Ldap-Group
rlm_ldap: Registering ldap_groupcmp for ldap2-Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap2
rlm_ldap: Over-riding set_auth_type, as there is no module ldap2 listed in the
"authenticate" section.
rlm_ldap: reading ldap<->radius mappings from file
/etc/opt/freeradius/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
conns: 0x81905a8
Module: Instantiating ldap3
ldap ldap3 {
server = "hidden3.example.com"
port = 389
password = "CMRh<k=5"
identity = "cn=radius,ou=Service Accounts,dc=rice,dc=edu"
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "ou=People,dc=rice,dc=edu"
filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr = "riceClass"
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/opt/freeradius/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 10
compare_check_items = no
do_xlat = yes
set_auth_type = yes
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Creating new attribute ldap3-Ldap-Group
rlm_ldap: Registering ldap_groupcmp for ldap3-Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap3
rlm_ldap: Over-riding set_auth_type, as there is no module ldap3 listed in the
"authenticate" section.
rlm_ldap: reading ldap<->radius mappings from file
/etc/opt/freeradius/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
conns: 0x8191900
Module: Linked to module rlm_perl
Module: Instantiating perl
perl {
module = "/etc/opt/freeradius/chksum.pm"
func_authorize = "authorize"
func_authenticate = "authenticate"
func_accounting = "accounting"
func_preacct = "preacct"
func_checksimul = "checksimul"
func_detach = "detach"
func_xlat = "xlat"
func_pre_proxy = "pre_proxy"
func_post_proxy = "post_proxy"
func_post_auth = "post_auth"
}
perl {
max_clones = 32
start_clones = 32
min_spare_clones = 0
max_spare_clones = 32
cleanup_delay = 5
max_request_per_clone = 0
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile =
"/var/opt/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 416
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/opt/freeradius/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
}
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 168.7.56.224 port 43814, id=0,
length=120
User-Name = "pengle"
NAS-IP-Address = 127.0.0.1
Calling-Station-Id = "02-00-00-00-00-01"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x0200000b0170656e676c65
Message-Authenticator = 0xf06ab6e90c34fcc07bca40836984a25e
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "pengle", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 11
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
[files] expand: %{Client-IP-Address} -> 168.7.56.224
[files] users: Matched entry DEFAULT at line 256
[files] WARNING: Unknown module "redundant_ldap" in string expansion
"%{redundant_ldap:ldap:///dc=rice,dc=edu?riceClass?sub?uid=%u}";
[files] expand:
OU=%{redundant_ldap:ldap:///dc=rice,dc=edu?riceClass?sub?uid=%u} -> OU=
++[files] returns ok
++- entering redundant-load-balance group redundant_ldap {...}
[ldap3] performing user authorization for pengle
[ldap3] expand: %{Stripped-User-Name} ->
[ldap3] expand: %{User-Name} -> pengle
[ldap3] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=pengle)
[ldap3] expand: ou=People,dc=rice,dc=edu -> ou=People,dc=rice,dc=edu
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to hidden3.example.com:389, authentication 0
rlm_ldap: bind as cn=radius,ou=Service Accounts,dc=rice,dc=edu/CMRh<k=5 to
hidden3.example.com:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in ou=People,dc=rice,dc=edu, with filter
(uid=pengle)
[ldap3] checking if remote access for pengle is allowed by riceClass
[ldap3] looking for check items in directory...
[ldap3] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP. Are you sure that the
user is configured correctly?
[ldap3] user pengle authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
+++[ldap3] returns ok
++- redundant-load-balance group redundant_ldap returns ok
++? if (reply:Class =~ /^[a-z]* student$/)
? Evaluating (reply:Class =~ /^[a-z]* student$/) -> FALSE
++? if (reply:Class =~ /^[a-z]* student$/) -> FALSE
++? elsif (reply:Class == "faculty")
? Evaluating (reply:Class == "faculty") -> FALSE
++? elsif (reply:Class == "faculty") -> FALSE
++? if (Connect-Info =~ /^[a-z]* student$/)
? Evaluating (Connect-Info =~ /^[a-z]* student$/) -> FALSE
++? if (Connect-Info =~ /^[a-z]* student$/) -> FALSE
++? elsif (Connect-Info == "faculty")
? Evaluating (Connect-Info == "faculty") -> FALSE
++? elsif (Connect-Info == "faculty") -> FALSE
perl_pool: item 0x81b0bf0 asigned new request. Handled so far: 1
found interpetator at address 0x81b0bf0
rlm_perl: Added pair NAS-Port-Type = Wireless-802.11
rlm_perl: Added pair Calling-Station-Id = 02-00-00-00-00-01
rlm_perl: Added pair Message-Authenticator = 0xf06ab6e90c34fcc07bca40836984a25e
rlm_perl: Added pair User-Name = pengle
rlm_perl: Added pair EAP-Message = 0x0200000b0170656e676c65
rlm_perl: Added pair Connect-Info = CONNECT 11Mbps 802.11b
rlm_perl: Added pair EAP-Type = Identity
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Framed-MTU = 1400
rlm_perl: Added pair Class = 0x4f553d
rlm_perl: Added pair Ldap-UserDn = uid=pengle, ou=People, dc=rice, dc=edu
rlm_perl: Added pair Auth-Type = EAP
perl_pool total/active/spare [32/0/32]
Unreserve perl at address 0x81b0bf0
++[perl] returns updated
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may
fail because of this.
..................
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
