debug? It could be that they just haven't been copied from inner to outer reply.
Ivan Kalik Kalik Informatika ISP Dana 25/11/2008, "Mustapha Bouikhif" <[EMAIL PROTECTED]> piše: >Hi Folk, > >I have activated attr_filter for a realm (dr4.cnrs.fr) and want users >from that realm to have 2 possible values of VLANs (VISITEUR or SIRC) >Here is my attr_file: >dr4.cnrs.fr > Service-Type == Login-User, > Framed-IP-Address == 255.255.255.254, > Framed-MTU >= 576, > Proxy-State =* ANY, > Reply-Message =* ANY, > EAP-Message =* ANY, > Message-Authenticator =* ANY, > State =* ANY, > Session-Timeout <= 28800, > Idle-Timeout <= 600, > Port-Limit <= 2, > Proxy-State =* ANY, > MS-MPPE-Recv-Key =* ANY, > MS-MPPE-Send-Key =* ANY, > User-Name =* ANY, > Called-Station-Id =* ANY, > Calling-Station-Id =* ANY, > NAS-Port-Type =* ANY, > NAS-Port =* ANY, > NAS-IP-Address =* ANY, > NAS-Identifier =* ANY, > Framed-Filter-ID =* ANY, > Tunnel-Type == VLAN, ># Tunnel-Type =* ANY, > Tunnel-Medium-Type == IEEE-802, ># Tunnel-Medium-Type =* ANY, > Trapeze-VLAN-Name == VISITEUR, > Trapeze-VLAN-Name == SIRC, ># Trapeze-VLAN-Name =* ANY, > Tunnel-Private-Group-Id == VISITEUR, > Tunnel-Private-Group-Id == SIRC ># Tunnel-Private-Group-Id =* ANY > >When i test the connexion with my account (my attribute >Tunnel-Private-Group-Id = Trapeze-VLAN-Name = VISITEUR), the >authentification is OK but radius server do not send this attribute to >the NAS: they are filtered and they should not. >When I set those attributes to * ANY, every thing works well. >I don't understand this behaviour. >Thanks for any ideas/help > > >-- >Mustapha BOUIKHIF >Service Systčmes d'Information >CNRS - DR4 > >tel: +33 1 69 82 33 97 >fax: +33 1 69 82 33 39 > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
