Right now I have 1 FreeRadius-server and 3 WAP54G AccessPoints. When I configure the AP's with WPA-Enterprise and point them to the FreeRadius-server, the FreeRadius-server doesn't get any data from the AP's.
I have one WAP54G that works most of the time, regardless where I put in in my network. One other has worked once. The third has never worked. All WAP54G AP's are the same. Same version, same firmware. Searching for a solution for this problem, I bumped in more complaints about the WAP54G with FreeRadius. For some reason, they stop working when some request-packages get lost. I posted my problem on the Linksys support forums. More information about my problem can be found there: http://forums.linksys.com/linksys/board/message?board.id=Access_Points&thread.id=8846 I was wondering if more FreeRadius users experience these problems with the WAP54G Op dinsdag 25-11-2008 om 11:53 uur [tijdzone +0100], schreef [EMAIL PROTECTED]: > >According to this thread, the problem occures as soon as one of the > >requests of the WAP54G is unsuccessful (a package is lost): > >http://www.linksysinfo.org/forums/archive/index.php?t-36702.html > > > > So what is the situation? Does the AP start working when you switch it > off and on again? Or not? Can you come up with a clear statement of > facts and not point to conclusions of somebody else (who might not have > the same problem as you do)? > > Ivan Kalik > Kalik Informatika ISP > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
