Alan DeKok wrote:
Fernando wrote:
Alan you can ignore the message before.
But, what is the information needed to put in LD_PRELOAD?
Whatever is needed to get the dynamic linker to load the libraries
from where you installed them.
Yes, it's works now, but I cann't execute any method... I'm trying
eap-md5 but nothing happens. I put in authentication section (eap2) I
remove eap module and I add experimentation.conf to radiusd.conf do I
need do anything more?
Thank you very much,
Fernando.
Here the request...
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.1.5 port 32771, id=0,
length=174
User-Name = "fernando"
NAS-IP-Address = 127.0.0.1
NAS-Identifier = "fernando.atica.um.es"
NAS-Port = 0
Called-Station-Id = "00-40-96-B2-13-4E:test"
Calling-Station-Id = "00-13-F7-23-FB-E3"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message = 0x02c6000d016665726e616e646f
Message-Authenticator = 0x702236655925bc2e878dce8dba4dad53
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "fernando", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
++[unix] returns updated
users: Matched entry fernando at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: No clear-text password in the request. Not performing PAP.
++[pap] returns noop
auth: No User-Password or CHAP-Password attribute in the request
auth: Failed to validate the user.
Login incorrect: [fernando/<no User-Password attribute>] (from client
192.168.1.5 port 0 cli 00-13-F7-23-FB-E3)
It's your system... you can read the "man" page for the linker. You
can remember where you installed the libraries.
This list isn't the place to learn Unix development.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
