Here is the output of a client associating immediately after the server starts: http://dpaste.com/112843/
Also, I am new to IOS, and there was no "debug aaa on" command. If you look closely at the top of the file I previously posted, I turned on about half of the options I thought relevant to debugging to aaa. I don't know if this would have an effect one showing what was relevant. I really appreciate the help everyone has given thus far. -William On Sun, Jan 25, 2009 at 04:23, <[email protected]> wrote: >>The full log may be viewed at: http://dpaste.com/112610/ >> >>Also, I have posted my eap.conf here: http://dpaste.com/112615/ >> >>and radius.conf here: http://dpaste.com/112616/ >> >>and I don't think anyone would need it, but here is clients.conf as >>well: http://dpaste.com/112618/ >> > > You have posted everything apart from the most important thing - radiusd > -X debug. I can see those tunnel attributes on Cisco debug but not in > the Access-Accept packet (the one with MPPE keys). > > Ivan Kalik > Kalik Informatika ISP > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
