>rad_recv: Access-Request packet from host 127.0.0.1:54057, id=172, length=59 > > User-Name = "monitor" > > User-Password = "XXXXXXXX" > > NAS-IP-Address = 255.255.255.255 > > NAS-Port = 1812 > > Processing the authorize section of radiusd.conf > >modcall: entering group authorize for request 0 > > modcall[authorize]: module "preprocess" returns ok for request 0 > > modcall[authorize]: module "chap" returns noop for request 0 > > modcall[authorize]: module "mschap" returns noop for request 0 > > rlm_realm: No '@' in User-Name = "monitor", looking up realm NULL > > rlm_realm: No such realm "NULL" > > modcall[authorize]: module "suffix" returns noop for request 0 > > rlm_eap: No EAP-Message, not doing EAP > > modcall[authorize]: module "eap" returns noop for request 0 > > users: Matched entry DEFAULT at line 152 > > users: Matched entry monitor at line 216 > > modcall[authorize]: module "files" returns ok for request 0 > >modcall: leaving group authorize (returns ok) for request 0 > > rad_check_password: Found Auth-Type System > >auth: type "System" >
You are using an ancient version of the server. Upgrade. If you insist on using outdated, buggy and unsecure version then comment out the DEFAULT entry setting Auth-Type System in users file. Ivan Kalik Kalik informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
