Thanks for help!!
It's work!! , but now have a problem from cisco. From aaa server
console mode all it's OK:
$ echo
"User-Name=user100,User-Password=pass,Service-Type=NAS-Prompt-User" |
radclient 127.0.0.1:1812 auth testing123
Received response ID 31, code 2, length = 50
Service-Type = NAS-Prompt-User
Cisco-AVPair = "shell:priv-lvl=0"
$ echo "User-Name=user100,User-Password=pass,Service-Type=Framed-User" |
radclient 127.0.0.1:1812 auth testing123
Received response ID 33, code 2, length = 68
Called-Station-Id = "1133"
Service-Type = Framed-User
Framed-Protocol = PPP
Cisco-AVPair = "ip:addr-pool=dynpool"
file "users"
usr100 User-Password := "pass", Service-Type == NAS-Prompt-User
Service-Type = NAS-Prompt-User,
cisco-avpair = "shell:priv-lvl=0"
usr100 Auth-Type := Local, User-Password := "pass"
Called-Station-Id == "1133",
Service-Type = Framed-User,
Framed-Protocol = PPP,
Cisco-AVPair ="ip:addr-pool=dynpool"
DEFAULT Framed-Protocol == PPP
Framed-Protocol = PPP,
Framed-Compression = Van-Jacobson-TCP-IP
DEFAULT Auth-Type := Reject
Reply-Message = "%{User-Name}, don't have access!"
User 'user100' try to login to cisco shell:
Line has invalid autocommand " ppp negotiate"Connection closed by
foreign host.
radiusd -X
rad_recv: Access-Request packet from host 192.168.10.100:1812, id=19,
length=79
NAS-IP-Address = 192.168.10.100
NAS-Port = 1
NAS-Port-Type = Virtual
User-Name = "user100"
Calling-Station-Id = "192.168.10.120"
User-Password = "pass"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "user100", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry user100 at line 641
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type Local
auth: type Local
auth: user supplied User-Password matches local User-Password
Sending Access-Accept of id 19 to 192.168.10.100 port 1812
Called-Station-Id == "1133"
Service-Type = Framed-User
Framed-Protocol = PPP
Cisco-AVPair = "ip:addr-pool=dynpool"
Finished request 0
Going to the next request
View this debug log, think problem to side a cisco, not a freeradius???
Cisco some how send wrong attribute, know you how to relove the problem?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
