I had same problem few days back...I think its problem of certificate. plz check the client certificate you have selected on your laptop.......
Basant Agarwal wrote: > > Hello, I am trying to authenticate wifi users for wireless network ... > for > this i am using freeradius with ldap... > When we run radtest on localhost, it is able to get authorised and > authenticated .. it works fine but when i try from laptop(windows ) then > it > rejects the same user... > please let me know what to do ...?? > > > here is the debug output .. > > Ready to process requests. > rad_recv: Access-Request packet from host 172.16.1.80:1122, id=0, > length=204 > Message-Authenticator = 0x3f459af06e42a2a0b7cf9c1d80092e31 > Service-Type = Framed-User > User-Name = "testap" > Framed-MTU = 1488 > Called-Station-Id = "00-15-E9-C9-F3-80:MNIT-DC-AP" > Calling-Station-Id = "00-16-6F-7C-DB-2D" > NAS-Identifier = "D-link Corp. Access Point" > NAS-Port-Type = Wireless-802.11 > Connect-Info = "CONNECT 54Mbps 802.11g" > EAP-Message = 0x0200000b01746573746170 > NAS-IP-Address = 172.16.1.80 > NAS-Port = 1 > NAS-Port-Id = "STA port # 1" > Processing the authorize section of radiusd.conf > modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "chap" returns noop for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 > rlm_realm: No '@' in User-Name = "testap", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 0 > rlm_eap: EAP packet type response id 0 length 11 > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation > modcall[authorize]: module "eap" returns updated for request 0 > users: Matched entry DEFAULT at line 153 > users: Matched entry DEFAULT at line 159 > users: Matched entry DEFAULT at line 177 > modcall[authorize]: module "files" returns ok for request 0 > rlm_ldap: - authorize > rlm_ldap: performing user authorization for testap > radius_xlat: '(uid=testap)' > radius_xlat: 'dc=mnit,dc=ac,dc=in' > rlm_ldap: ldap_get_conn: Checking Id: 0 > rlm_ldap: ldap_get_conn: Got Id: 0 > rlm_ldap: attempting LDAP reconnection > rlm_ldap: (re)connect to 172.16.1.20:389, authentication 0 > rlm_ldap: bind as uid=admin,ou=people,dc=mnit,dc=ac,dc=in/system to > 172.16.1.20:389 > rlm_ldap: waiting for bind result ... > rlm_ldap: Bind was successful > rlm_ldap: performing search in dc=mnit,dc=ac,dc=in, with filter > (uid=testap) > rlm_ldap: looking for check items in directory... > rlm_ldap: looking for reply items in directory... > rlm_ldap: user testap authorized to use remote access > rlm_ldap: ldap_release_conn: Release Id: 0 > modcall[authorize]: module "ldap" returns ok for request 0 > rlm_pap: WARNING! No "known good" password found for the user. > Authentication may fail because of this. > modcall[authorize]: module "pap" returns noop for request 0 > modcall: leaving group authorize (returns updated) for request 0 > rad_check_password: Found Auth-Type ldap > auth: type "LDAP" > Processing the authenticate section of radiusd.conf > modcall: entering group LDAP for request 0 > rlm_ldap: - authenticate > rlm_ldap: Attribute "User-Password" is required for authentication. > modcall[authenticate]: module "ldap" returns invalid for request 0 > modcall: leaving group LDAP (returns invalid) for request 0 > auth: Failed to validate the user. > Delaying request 0 for 1 seconds > Finished request 0 > Going to the next request > --- Walking the entire request list --- > Waking up in 1 seconds... > --- Walking the entire request list --- > Waking up in 1 seconds... > --- Walking the entire request list --- > Sending Access-Reject of id 0 to 172.16.1.80 <http://172.16.1.80/>port > 1122 > Waking up in 4 seconds... > --- Walking the entire request list --- > Cleaning up request 0 ID 0 with timestamp 46b1b8cb > Nothing to do. Sleeping until we see a request. > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > -- View this message in context: http://www.nabble.com/user-Password-required-for-ldap-radius-tp22861643p22861786.html Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
