Steve,
Your wireless access point is sending the MAC address as the username and
password. Change the username and password in the users file and the
authentication will work.
rad_recv: Access-Request packet from host 10.10.18.241:2160, id=7, length=53
User-Name = "00215c-08b25d" <--- This came from the wireless
access point
User-Password = "00215c-08b25d" <--- This came from the wireless
access point
Tim
From:
freeradius-users-bounces+tim.sylvester=networkradius....@lists.freeradius.org
[mailto:freeradius-users-bounces+tim.sylvester=networkradius....@lists.freeradius.org]
On Behalf Of Steve Wu
Sent: Friday, May 08, 2009 8:35 AM
To: [email protected]
Subject: FR Using MAC Authentication
Hi -
I have just started tinkering with Freeradius, I built an Ubuntu 8.10 server
box and installed FR --> sudo apt-get install freeradius*. It installed in a
breeze and tested fine. I have setup a HP420 AP for testing, it's chattering
with the FR box fine (I think).
I want my wireless clients to do MAC authentication via the FR box. I have
setup my users file to auth two of my test laptops:
000E35-84610A Auth-Type := Local, User-Password == "esradius"
00215C-08B25D Auth-Type := Local, User-Password == "esradius"
When either tries to connect up, in the FR debug I see:
rad_recv: Access-Request packet from host 10.10.18.241:2160, id=7, length=53
User-Name = "00215c-08b25d"
User-Password = "00215c-08b25d"
Processing the authorize section of radiusd.conf
The authentication eventually fails:
rlm_pap: WARNING! No "known good" password found for the user. Authentication
may fail because of this.
Why is the User-Password the MAC address and not what is specified in the users
file? I have only tweaked the users and clients.conf files.
Just simple MAC authentication, that's all I want at this point.
Thanks in advance!
- Steve
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
