Hi All, I wanna migrate my radius server from icradius to freeradius 2.1.5. i have two ras modem for my nas (patton and usr-hiper). When I do some migration simulation, client that connect from patton goes normally (authentication,accounting,authorization). But when they use usr-hiper (system version :V5.1.6/Non-Encr), the client could connect to the network but the accounting goes wrong.
In my freeradius debugging mode, the error message was : rad_recv: Accounting-Request packet from host x.x.x.x (* encrypted ip) port 1646, id=63, length=405 Received Accounting-Request packet from x.x.x.x (* encrypted ip) with invalid signature! (Shared secret is incorrect.) Dropping packet without response. Going to the next request Waking up in 0.9 seconds. The usr-hiper accounting settings : HiPer>> sh accounting RADIUS ACCOUNTING SETTINGS The Primary Server Status is: ENABLED Primary Server is: x.x.x.x(* encrypted ip) Primary First Backup Server is: 0.0.0.0 Primary Second Backup Server is: 0.0.0.0 Primary Destination Port is: 1648 Primary First Backup Destination Port: 1646 Primary Second Backup Destination Port: 1646 Primary Preference: 1 Primary First Backup Preference: 2 Primary Second Backup Preference: 3 Max Primary Retransmissions: 0 The Secondary Server Status is: ENABLED Secondary Server is: 0.0.0.0 Secondary First Backup Server is: 0.0.0.0 Secondary Second Backup Server is: 0.0.0.0 Secondary Destination Port is: 1646 Secondary First Backup Destination Port: 1646 Secondary Second Backup Destination Port: 1646 Secondary Preference : 1 Secondary First Backup Preference: 2 Secondary Second Backup Preference: 3 What I have tried to solve it : 1. I've tried to make multi port for accounting packet (1646 & 1648), because i thought that the error message refer to wrong accounting port. But the accounting still wrong. 2. I've tried to use default freeradius secret at the freeradius side with testing123 without changing the secret at the ras modem. But still failed. Do you have another solution ? Thanks before :) - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
