Hi, I have following setup
BRAS (7206) ----> Free radius How do i configure Bras or free radius to update volume information for uplink and downlink on frequently basis. Cisco-AVpair += "ip:traffic-class=out default drop", Acct-Interim-Interval=900, Cisco-AVPair += "subscriber:accounting-list=PPP_ACCOUNTING_LIST" Is there any sample configuration on this. Please let us know. BR Ganesh --- On Tue, 8/18/09, ganesh nagpure <[email protected]> wrote: > From: ganesh nagpure <[email protected]> > Subject: Re: Stale Session and Simultaneous-Use Question > To: "FreeRadius users mailing list" <[email protected]> > Date: Tuesday, August 18, 2009, 12:36 PM > Hi All, > > I have following setup and need to configure the setup as > per following requirements. > > BRAS (7206) - Radius (Free radius) - Proxy Radius > (Third party radius) > > BRAS will send accounting and auth request to free radius > server and free radius server will forward this to proxy > radius. > Is it possible to configure free radius server to do the > following thing. > 1) Forward the acc/auth request to proxy > radius server and wait for acknowledgement. > 2) If proxy radius server send the > acknowledgement then allow the user session > 3) If proxy radius does not send the > acknowledgement then disconnect the session or do not allow > the user session > 4) If the session is on going and if > proxy radius is sending the stop session message because of > user account modification or some other reason to free > radius then free radius should inform the BRAS to stop > current session. > 5) Free radius should forward the entire > attribute to proxy radius which is forwarded by BRAS. > 6) BRAS are configuring to send periodic > accounting update request for every five minutes. Does free > radius forward the periodic accounting request to proxy > radius server? > > > Your help on this will be highly appreciable. > > BR > Ganesh > > > > > --- On Tue, 8/18/09, Deepak <[email protected]> > wrote: > > > From: Deepak <[email protected]> > > Subject: Re: Stale Session and Simultaneous-Use > Question > > To: "FreeRadius users mailing list" <[email protected]> > > Date: Tuesday, August 18, 2009, 12:15 PM > > > 3) acctterminatecause - What are > > the possible values here? In my > > > table, I can see "User-Request" and > "Session-Timeout". > > In the link I > > > mentioned in my previous post uses "User-Reset". > This > > is the part I am > > > not sure on what is the appropriate value to use > in > > this field. > > > > Found in http://freeradius.org/rfc/rfc2866.html#Acct-Terminate-Cause. > > My bad I have overlook this :-) > > > > Thanks anyway > > > > > > > > -- > > ============================== > > Registered Linux User #460714 > > Currently Using Fedora 10, CentOS 5.3 > > ============================== > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
