Hello. Trying to set up some new devices (AudioCodes MP118) to authenticate, but the dictionary entries the mfr. says is for FreeRadius doesn't quite work.
Using FreeRadius v. 2.1.6 on Mac OS X The users entries they say to try looks like this: john Auth-Type := Local, User-Password == "qwerty" Service-Type = Login-User, ACL-Auth-Level = ACL-Auth-SecurityAdminLevel or on another user, it's set lower as: ACL-Auth-Level = ACL-Auth-UserLevel #AudioCodes VSA dictionary VENDOR AudioCodes 5003 ATTRIBUTE ACL-Auth-Level 35 integer AudioCodes VALUE ACL-Auth-Level ACL-Auth-UserLevel 50 VALUE ACL-Auth-Level ACL-Auth-AdminLevel 100 VALUE ACL-Auth-Level ACL-Auth-SecurityAdminLevel 200 But that above entry causes this: Errors reading dictionary: dict_init: /opt/local/etc/raddb/dictionary[39]: unknown option "AudioCodes" For kicks, I have tried leaving the dictionary entry out and tried Login-User by itself (doesn't authenticate) as well as Administrative-User for Service Type but all that does is authenticate, but at a level too low to do anything. Needless to say, commenting out the dictionary entries just cause the daemon to choke on the users file... And vice versa. http://www.audiocodes.com/filehandler.ashx?fileid=36358 is the guide I was using for reference. Thanks in advance for any pointers. Mark - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
