> Since upgrading FR to 2.1.7 from 2.1.3 and 2.1.1 on our 2 servers
> there's been an issue with our proxy pool.
>
> There are three servers in the auth and acct pools, but unless I comment
> two of them out (as below) I receive a 'Request Denied' message back in
> response to the first access-request packet that is proxied to one of
> the auth servers.
>
> Is this a bug in 2.1.7, or is there a difference in configuration file
> format between the versions?
>
> # POOL Server config...
>
> pool_config {
> test_username = '[email protected]'
> test_password = '***************'
> secret0 = '***************'
> secret1 = '***************'
> secret2 = '***************'
> }
>
> realm pool {
> nostrip
> auth_pool = pool_auth
> acct_pool = pool_acct
> }
>
> # Server Pools
> server_pool pool_auth {
> type = client-port-balance
> # home_server = pool0
> home_server = pool1
> # home_server = pool2
> }
>
> server_pool pool_acct {
> type = client-port-balance
> # home_server = pool0
> home_server = pool1
> # home_server = pool2
> }
>
> home_server pool0 {
> status_check = request
> username = ${pool_config.test_username}
> password = ${pool_config.test_password}
> ipaddr = server0.net
> secret = ${pool_config.secret0}
> port = 1812
> type = auth+acct
> }
>
> home_server pool1 {
> status_check = request
> username = ${pool_config.test_username}
> password = ${pool_config.test_password}
> ipaddr = server1.net
> secret = ${pool_config.secret1}
> port = 1812
> type = auth+acct
> }
>
> home_server pool2 {
> status_check = request
> username = ${pool_config.test_username}
> password = ${pool_config.test_password}
> ipaddr = server2.net
> secret = ${pool_config.secret2}
> port = 1812
> type = auth+acct
> }
Start the server in debug mode. You will see how does home server
configuration resolve and is something not as expected.
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
