Dear all;
I'm having an issue when proxying an access-request message between two WiMAX
networks.
I recently downloaded FR 2.1.8 and I'm in the middle of the messaging path.
The home network is using EAP-TLS but it should be transparent for the proxy
right?
The issue is with the AVP WiMAX-Capability(1) please see below the packets
captured (shown as in WireShark)
Sending network AVP before FR proxy as arrived:
AVP: l=17 t=Vendor-Specific(26) v=WiMAX(24757)
VSA: l=11 t=WiMAX-Capability(1) C=0x00: 2 TLV(s) inside
TLV: l=5 t=WiMAX-Release(1): 1.4
WiMAX-Release: 1.4
TLV: l=3 t=WiMAX-Accounting-Capabilities(2): No-Accounting(0)
WiMAX-Accounting-Capabilities: No-Accounting (0)
After proxy from FR to the Home network
AVP: l=17 t=Vendor-Specific(26) v=WiMAX(24757)
VSA: l=11 t=WiMAX-Capability(1) C=0x00:
TLV: l=7 t=WiMAX-Release(1): 1.4\002\005
WiMAX-Release: 1.4\002\005
[Not enough room in packet for TLV header]
The home network AAA complains with the error message that can not decode the
AVP WiMAX-Capabilty.
Any ideas why and what can I do to fix it are very much appreciated
Merci
Thanks a lot
Vielen Dank!
Gracias
Ramon-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
