What operator are you using? I have multi AVPairs and i have := on the first one and += on the others working for me.
Andrew Paternoster Senior System Engineer [cid:logo1af4.jpg]<http://www.gpk.net.au/> [cid:spacerecc.jpg] <http://www.gpk.net.au> 2/94 Abbott Road, Hallam, VIC 3083 Phone: 1300 854 223 Fax: 1300 854 228 www.gpk.net.au<http://www.gpk.net.au/> Did you know that you can now log faults by just sending an email to [email protected]<mailto:[email protected]> The information contained in or accompanying this e-mail is intended only for the use of the stated recipient and may contain information that is confidential and/or privileged. If the reader is not the intended recipient or the agent thereof, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited and may constitute a breach of confidence and/or privilege. If you have received this e-mail in error, please notify us immediately. Any views or opinions presented are those solely of the author and do not necessarily represent those of GPK Computers Pty Ltd.. Warning: Although the company has taken reasonable precautions to ensure no viruses are present in this e-mail, the company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments From: [email protected] [mailto:[email protected]] On Behalf Of Robert White Sent: Tuesday, 17 November 2009 1:05 PM To: FreeRadius users mailing list Subject: Accessing a second AV Pair Hi, I have a Radius message which has two AV Pairs and I want to insert them both in to a database. However, I'm unable to access the second AVPair. Here is the Radius packet.... rad_recv: Accounting-Request packet from host 10.152.0.7 port 20001, id=87, length=662 NAS-IP-Address = 10.152.0.7 Quintum-NAS-Port = "0 7/7/24" NAS-Port-Type = Async User-Name = "99999999" Called-Station-Id = "990006" Calling-Station-Id = "1002" Acct-Status-Type = Stop Acct-Delay-Time = 0 Acct-Input-Octets = 0 Acct-Output-Octets = 0 Acct-Session-Id = "000000AA00000039" Acct-Session-Time = 75 Acct-Input-Packets = 0 Acct-Output-Packets = 0 Service-Type = Login-User Quintum-AVPair = "h323-ivr-out=ACCESSCODE:990006" Quintum-h323-conf-id = "h323-conf-id=34623032 38616662 32630030 37333300" Quintum-AVPair = "h323-incoming-conf-id=34623032 38616662 32630030 37333300" Quintum-h323-gw-id = "h323-gw-id=au-syd-test1" Quintum-h323-call-origin = "h323-call-origin=answer" Quintum-h323-call-type = "h323-call-type=Telephony" Quintum-h323-setup-time = "h323-setup-time=01:37:31.685 UTC Tue Nov 17 2009" Quintum-h323-connect-time = "h323-connect-time=01:37:31.885 UTC Tue Nov 17 2009" Quintum-h323-disconnect-time = "h323-disconnect-time=01:38:46.495 UTC Tue Nov 17 2009" Quintum-h323-disconnect-cause = "h323-disconnect-cause=10" Quintum-h323-voice-quality = "h323-voice-quality=0" Quintum-Trunkid-In = "0 7/7/24" Quintum-Trunkid-Out = "10.0.20.36" When using the standard dictionary.quintum %{Quintum-AVPair} = h323-ivr-out=ACCESSCODE:990006. I couldn't read the second AVPair. I did some Googling and read "if it [the preprocess module] founds Cisco-AVPair attribute like Cisco-AVPair = "gw-rxd-cdn=ton:0,npi:1,#:XXXXXXXX" and there's dictionary attribute gw-rxd-cdn, then it adds new attribute "gw-rxd-cdn" with value "ton:0,npi:1,#:XXXXXXXX". So if you have Cisco-AVPair attributes which you would like to insert into SQL, you need to create them in cisco dictionary." As Quintum and Cisco are very similar I tried the same thing and edited the dictionary.quintum file adding in the following lines: ATTRIBUTE h323-ivr-out 3000 string ATTRIBUTE h323-incoming-conf-id 3001 string I noted that there is already a very similar attribute for h323-incoming-conf-id - it just has the word 'Quintum' prepended to it. However, after the dictionary edit, Radius failed to load. I got the following error: "Errors reading dictionary: dict_init: /usr/local/share/freeradius/dictionary.quintum[53]: dict_init: /usr/local/share/freeradius/dictionary.quintum[53]:" Am I on the right track here? Any help appreciated. Thanks, Rob
<<inline: logo1af4.jpg>>
<<inline: spacerecc.jpg>>
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
