On 11/30/2009 05:07 PM, freerad...@corwyn.net wrote:
At 03:27 PM 11/30/2009, David Mitchell wrote:
1) Don't specify the Auth-Type. You still want to check the password I
assume. I think your config will let in any user who is in group
"Group1" irrespective of the supplied password.
Sigh. Here I was all excited that I had everything working, and was
merrily working on my docs and making them into a HOWTO. And you're
right on target. Correct user ID any password permits access.
So here's my users file once I take that out:
DEFAULT Huntgroup-Name == Cisco_Huntgroup, Ldap-Group == "Infrastructure"
Service-Type:=NAS-Prompt-User,cisco-avpair:=shell:priv-lvl=15"
DEFAULT Auth-Type = ntlm_auth
And now it doesn't work.
"Authentication failed".
If I switch the order I get:
"Authorization failed"
You need to set fall-through so that you still do per user processing.
This is documented in the raddb/users file and you should also read
doc/processing_users_file
--
John Dennis <jden...@redhat.com>
Looking to carve out IT costs?
www.redhat.com/carveoutcosts/
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html