On Wed, 2010-01-06 at 17:05 +0100, Bjørn Mork wrote: > Osmany <[email protected]> writes: > > >> If you would like this test user connect from another phone number, > >> simply add another entry in the same table, just as you did before. > >> > > > > Add another entry with the Calling-Station-Id attribute? Let's see if I > > understand. After I add the other entry in the table it would look like > > this: > > > > |312|[email protected]|Calling-Station-Id | == | "phonenumber" > > |298|[email protected]|MD5-Password | := | password > > |313|[email protected]|Calling-Station-Id | += | "phonenumber" > > > > Let me just clarify that I tried this before and when I try to connect with > > this user, > > freeradius does not let me. > > No, that won't work. All the check items must match for FreeRADIUS to > consider the user. Testing the same attribute for equality with two > different values is pointless. > > You'd either have to use groups, or much simpler: Use the regexp > operator to match Calling-Station-Id against a regexp of all the values > you want to allow. I.e > Calling-Station-Id =~ phonenumber|phonenumber|etc > > This will also allow you to ignore leading digits (area codes etc), > match on a seqence of numers, etc etc. > > > Bjørn That works fine if I try to connect from the phone numbers specified, but if I try to connect from any other phone number, it still lets me in. The point is that I don't want the user to be able to connect from any other phone number unless it is specified in the Calling-Station-Id attribute.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
