Mike Bernhardt wrote: > "It doesn't work" referred to the original question I posted with the same > subject a few weeks ago. At that time I provided debug output.
Ah... that's the "failed creating proxy socket" issue. Weird. > I tried this > configuration with 2.1.7 and 2.1.8 but it "didn't work" in that the request > never left freeradius for the downstream server. After I installed 2.1.4, it > worked as it should without changing anything else. I will try reinstalling > 2.1.8 just for fun and see if it behaves this time. If it doesn't, I'll > stick with 2.1.4 and send you my config files. OK. If 2.1.8 didn't work 2 weeks ago, re-installing it will likely not help. > As far as status checks, the authentication pings will work fine. I see now > that they only kick in when a server is marked dead. If I can figure out how > to shorten the time before it is marked dead I'll be very satisfied with > that setup. raddb/proxy.conf. All of the configuration items are documented there. Be aware, though, that 2.1.8 makes these work better than 2.1.4. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
