Hello all.
I tried to configure COA service on my test server.
When i send coa packet:
# echo User-Name = cisco, mpd-limit += \"in#1=all rate-limit 1320000
150000 300000\",
mpd-limit += \"out#2=all rate-limit 1320000 150000 300000\"|radclient -d
/usr/local/share/freeradius/ -x [nas ip]:3799 coa [nas secret]
FreeRADIUS asking:
rad_recv: CoA-Request packet from host 127.0.0.1 port 20722, id=231,
length=126
User-Name = "cisco"
mpd-limit = "in#1=all rate-limit 1320000 150000 300000"
mpd-limit = "out#2=all rate-limit 1320000 150000 300000"
server localhost-coa {
WARNING: Empty section. Using default return values.
WARNING: Empty section. Using default return values.
} # server localhost-coa
Sending CoA-ACK of id 231 to 127.0.0.1 port 20722
What am I missing?
My configuration on FreeBSD 8.0, FreeRADIUS 2.1.8, MPD (as a NAS)
in radius.conf
listen {
ipaddr = 127.0.0.1
port = 3799
type = coa
virtual_server = coaon
}
in clients.conf
client localhost {
ipaddr = 127.0.0.1
secret = test1
nastype = other
coa_server = coaon
in sites-enabled/originate-coa
home_server coaon {
type = coa
ipaddr = 127.0.0.1
port = 3799
secret = test2
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool coa {
type = fail-over
home_server = coaon
}
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
