> > hello all, > > My version of freeradius is Version 2.1.0 > > here is my result in debug mode: > > rad_recv: Access-Request packet from host 192.168.20.253 port 1645, id=112, > length=131 > User-Name = "linatest" > Service-Type = Framed-User > Framed-MTU = 1500 > Called-Station-Id = "00-1A-A1-64-BB-1A" > Calling-Station-Id = "00-18-8B-B5-26-B7" > EAP-Message = 0x0202000d016c696e6174657374 > Message-Authenticator = 0x3fe6e297218c3aa1e98286a5a3db3303 > NAS-Port = 50024 > NAS-Port-Type = Ethernet > NAS-IP-Address = 192.168.20.253 > +- entering group authorize {...} > ++[preprocess] returns ok > ++[chap] returns noop > [files] users: Matched entry linatest at line 11 > ++[files] returns ok > WARNING: Please update your configuration, and remove 'Auth-Type = Local' > WARNING: Use the PAP or CHAP modules instead. > No User-Password or CHAP-Password attribute in the request. > Cannot perform authentication. > Failed to authenticate the user. > Delaying reject of request 0 for 1 seconds > Going to the next request > Waking up in 0.9 seconds. > Sending delayed reject for request 0 > Sending Access-Reject of id 112 to 192.168.20.253 port 1645 > Service-Type = Framed-User > Waking up in 4.9 seconds. > Cleaning up request 0 ID 112 with timestamp +20 > > > i don't have 'Auth-Type = Local' but it still remaining me this > And : > No User-Password or CHAP-Password attribute in the request. > Cannot perform authentication. > Failed to authenticate the user. > > where to put this CHAP-Password attribute in the request?? > > here is my users file > > linatest Cleartext-Password := "mypass" > Service-Type = Framed-User > > > > thanks for your help > >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html